{"title":"GANG SHEETS","description":"","products":[{"product_id":"gang-dtf-sheet-2","title":"DTF GANG Sheet","description":"\u003cdiv style=\"text-align: center;\"\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e***RESIZING AND COLOR CORRECTIONS ARE NOT AVAILABLE ON GANG SHEET ORDERS.  GANG SHEETS MUST BE PRINT READY***\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eTo Order:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003ePlease upload your image(s) by clicking the “Create Gang Sheet Button”.\u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003e  \u003c\/span\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cspan\u003e\u003cem\u003ePlease ensure the sizing and coloring is correct as it will be printed exactly as it is uploaded.\u003c\/em\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eOnce your artwork is formatted, you will be prompted to return to the product page.  Click “Redirect”\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan color=\"#2b00ff\"\u003e\u003cspan\u003eAdd the desired quantity and then click “Add to Cart.”\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFor the best quality prints, we recommend you upload a TRANSPARENT PNG image with a 300 dpi. \u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\n\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\n\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003ePressing Instructions\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\n\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003eDTF TRANSFERS\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eDTF - Heat press temperature should be set to Polyester and Polyester Blends 285-Cotton 300 F.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cspan data-mce-fragment=\"1\"\u003ePrior to heat pressing, hover the heat press over the transfer INK SIDE UP as close as you can without touching the transfer and allow the transfer to warm up for 30-60 seconds and this process will remove moisture from the transfer. This moisture in the ink builds up during the mailing process.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eAfter the transfer is warmed up, it is ready for step 2.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eUse Medium to heavy Pressure to press the moisture out of your shirt and then press the transfer on the shirt for 15 seconds, let cool completely and peel.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eIf there are small elements in the design, let it cool completely before removing the transfer film.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eUse a cover sheet (Teflon or white butcher paper\/copier paper) after you’ve peeled the transfer, press again for 5-10 seconds.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e-If printing small print or small text, press for 20 seconds using heavy pressure and let the transfer cool before peeling. If for any reason that the print begins to lift off the shirt, usually due to an inexpensive heat press Don’t freak out, STOP PEELING AND PRESS IT AGAIN. Most likely your heat press has uneven pressure and heat.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eMachine wash cold\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eTumble dry low\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\n\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\n\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\n\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\n\u003cstrong\u003e\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\n\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e• \u003cstrong\u003eWhen you purchase this Ready to Press Transfer, you are agreeing that you are responsible of any outcome of your end product, and that you will be using the correct equipment needed. You are also agreeing that you have fully read the instructions, and you understand the application errors are the responsibility of the buyer (you).\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e**** CCMbyCrystal is NOT responsible for lost or stolen mail.****\u003c\/strong\u003e\u003c\/div\u003e","brand":"CCMbyCrystal","offers":[{"title":"22.3 x 12","offer_id":47187634454711,"sku":null,"price":6.0,"currency_code":"USD","in_stock":true},{"title":"22.3 X 24","offer_id":42059428823223,"sku":null,"price":12.0,"currency_code":"USD","in_stock":true},{"title":"22.3 X 36","offer_id":42059428855991,"sku":null,"price":18.0,"currency_code":"USD","in_stock":true},{"title":"22.3 X 48","offer_id":42059428888759,"sku":null,"price":24.0,"currency_code":"USD","in_stock":true},{"title":"22.3 X 60","offer_id":42059428921527,"sku":null,"price":30.0,"currency_code":"USD","in_stock":true},{"title":"22.3 X 72","offer_id":42059428954295,"sku":null,"price":36.0,"currency_code":"USD","in_stock":true},{"title":"22.3 X 84","offer_id":42059428987063,"sku":null,"price":42.0,"currency_code":"USD","in_stock":true},{"title":"22.3 X 96","offer_id":42059429019831,"sku":null,"price":48.0,"currency_code":"USD","in_stock":true},{"title":"22.3 X 108","offer_id":42059429052599,"sku":null,"price":54.0,"currency_code":"USD","in_stock":true},{"title":"22.3 X 120","offer_id":42059429085367,"sku":null,"price":60.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0266\/7043\/2439\/files\/gangsheet_742a2182-201d-4ca9-822f-b1041702c583.jpg?v=1700480248"},{"product_id":"gang-dtf-sheet-15-75","title":"UV DTF GANG Sheet","description":"\u003cdiv style=\"text-align: center;\"\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e***RESIZING AND COLOR CORRECTIONS ARE NOT AVAILABLE ON GANG SHEET ORDERS.  GANG SHEETS MUST BE PRINT READY***\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eTo Order:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003ePlease upload your image(s) by clicking the “Create Gang Sheet Button”.\u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003e  \u003c\/span\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cspan\u003e\u003cem\u003ePlease ensure the sizing and coloring is correct as it will be printed exactly as it is uploaded.\u003c\/em\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eOnce your artwork is formatted, you will be prompted to return to the product page.  Click “Redirect”\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan color=\"#2b00ff\"\u003e\u003cspan\u003eAdd the desired quantity and then click “Add to Cart.”\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFor the best quality prints, we recommend you upload a TRANSPARENT PNG image with a 300 dpi. \u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eUV DTF Instructions\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003eThis is the ready to apply UV DTF transfer. \u003cbr\u003eThe Glass Can is not included with this purchase. \u003cbr\u003eThis is NOT a digital file.\u003cbr\u003e\u003cbr\u003ePlease wait a minimum of 24-28 hours before hand washing your glass gently in warm water. Do not use anything abrasive to wash the outside of your glass. Do no soak. Microwave and dishwasher are not recommended.\u003cbr\u003e\u003cbr\u003e 1. Clean glass.\u003cbr\u003e 2. Peel design transfer off paper backing.\u003cbr\u003e 3. Align and place the transfer on the cup.\u003cbr\u003e 4. Working from the center outwards, press the transfer down. Use your\u003cbr\u003e fingers or a squeegee to push out any bubbles.\u003cbr\u003e 5. Peel the clear film off slowly. \u003cbr\u003e\u003cbr\u003e*** Once the transfer is on the glass, you cannot reposition it. ***\u003cbr\u003e\u003cbr\u003eYouTube is a great place to start for application tips and tricks.\u003cbr\u003e\u003cbr\u003e• All transfers are non-refundable.\u003cbr\u003e• No returns are accepted.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e• When you purchase this UV DTF Transfer, you are agreeing that you are responsible of any outcome of your end product, and that you will be using the correct equipment needed. You are also agreeing that you have fully read the instructions, and you understand the application errors are the responsibility of the buyer (you).\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e**** CCMbyCrystal is NOT responsible for lost or stolen mail.****\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/div\u003e","brand":"CCMbyCrystal","offers":[{"title":"15.75\"x16\"","offer_id":42059439997111,"sku":null,"price":8.0,"currency_code":"USD","in_stock":true},{"title":"15.75\"x32\"","offer_id":42059443372215,"sku":"","price":16.5,"currency_code":"USD","in_stock":true},{"title":"15.75\"x48\"","offer_id":42059443404983,"sku":"","price":25.0,"currency_code":"USD","in_stock":true},{"title":"15.75\"x64\"","offer_id":42059443437751,"sku":"","price":33.5,"currency_code":"USD","in_stock":true},{"title":"15.75\"x80\"","offer_id":42059443470519,"sku":"","price":42.0,"currency_code":"USD","in_stock":true},{"title":"15.75\"x96\"","offer_id":42059443503287,"sku":"","price":50.5,"currency_code":"USD","in_stock":true},{"title":"15.75\"x120\"","offer_id":42059443536055,"sku":"","price":61.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0266\/7043\/2439\/files\/uvdtfgangsheet.jpg?v=1700695636"},{"product_id":"pre-made-valentines-gang-sheet-60-dtf-gang-sheet","title":"Pre-Made Valentines GANG Sheet 60\" DTF Gang Sheet","description":"\u003cdiv style=\"text-align: center;\"\u003e\n\u003cp\u003eValentine Gang Sheet - All Designs are 11\" Longest side.\u003cbr\u003eThis is a physical print out that will be mailed to you.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDTF Transfers can go on any T-shirt. It has a thinner feel than vinyl.\u003cbr\u003e\u003cbr\u003e**Must use a Heat Press****\u003cbr\u003ePressing Instructions\u003cbr\u003eDTF - Heat press temperature should be set to Polyester and Polyester Blends 285-Cotton 300 F.\u003cbr\u003ePrior to heat pressing, hover the heat press over the transfer INK SIDE UP as close as you can without touching the transfer and allow the transfer to warm up for 30-60 seconds and this process will remove moisture from the transfer. This moisture in the ink builds up during the mailing process. \u003cbr\u003eAfter the transfer is warmed up, it is ready for step 2.\u003cbr\u003eUse Medium to heavy Pressure to press the moisture out of your shirt and then press the transfer on the shirt for 15 seconds, let cool completely and peel. \u003cbr\u003eIf there are small elements in the design, let it cool completely before removing the transfer film.\u003cbr\u003eUse a cover sheet (Teflon or white butcher paper\/copier paper) after you’ve peeled the transfer, press again for 5-10 seconds.\u003cbr\u003e-If printing small print or small text, press for 20 seconds using heavy pressure and let the transfer cool before peeling. If for any reason that the print begins to lift off the shirt, usually due to an inexpensive heat press Don’t freak out, STOP PEELING AND PRESS IT AGAIN. Most likely your heat press has uneven pressure and heat.\u003cbr\u003eMachine wash cold\u003cbr\u003eTumble dry low\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSublimation Transfers\u003cbr\u003eThis transfer is to be used with your heat press for applying designs to your shirts, can coolers, or any sublimation blanks.\u003cbr\u003eA HEAT PRESS is a MUST to applying any Ready to Press Designs. (An iron will NOT work)\u003cbr\u003e• High Poly Tee (at least 65% Poly. 100% is best) or any Sublimation Blank to press the design on.\u003cbr\u003e• Your Heat Press should be set to 385 - 400 Degrees F\u003cbr\u003e• Medium Pressure\u003cbr\u003e• For 60 Seconds.\u003cbr\u003e• Pre-press your garment for 3-5 seconds to remove any moisture\u003cbr\u003e• Place a sheet of paper inside the garment, (copy paper is fine). Directly under where you are putting the design.\u003cbr\u003e• Place your sublimation print face down on the garment\u003cbr\u003e• Cover with white butcher paper.\u003cbr\u003e• Press\u003cbr\u003e• Remove Butcher paper and Transfer Print immediately after pressing\u003cbr\u003e**** Times, temperature, and pressure may vary slightly with different heat presses ****\u003cbr\u003e\u003cbr\u003e• Sizes are listed as general popular sizes most commonly ordered for tees.\u003cbr\u003e• All transfers are non-refundable.\u003cbr\u003e• No returns are accepted.\u003cbr\u003e• When you purchase this Ready to Press Transfer, you are agreeing that you are responsible of any outcome of your end product, and that you will be using the correct equipment needed. You are also agreeing that you have fully read the instructions, and you understand the application errors are the responsibility of the buyer (you).\u003cbr\u003e\u003cbr\u003e**** CCMbyCrystal is NOT responsible for lost or stolen mail.***\u003c\/p\u003e\n\u003c\/div\u003e","brand":"CCMbyCrystal","offers":[{"title":"22 X 60","offer_id":42264207065271,"sku":null,"price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0266\/7043\/2439\/files\/premade.jpg?v=1707096274"},{"product_id":"pre-made-anti-valentines-gang-sheet-60-dtf-gang-sheet","title":"Pre-Made Anti-Valentines GANG Sheet 60\" DTF Gang Sheet","description":"\u003cdiv style=\"text-align: center;\"\u003e\n\u003cp\u003eValentine Gang Sheet - All Designs are 11\" Longest side.\u003cbr\u003eThis is a physical print out that will be mailed to you.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDTF Transfers can go on any T-shirt. It has a thinner feel than vinyl.\u003cbr\u003e\u003cbr\u003e**Must use a Heat Press****\u003cbr\u003ePressing Instructions\u003cbr\u003eDTF - Heat press temperature should be set to Polyester and Polyester Blends 285-Cotton 300 F.\u003cbr\u003ePrior to heat pressing, hover the heat press over the transfer INK SIDE UP as close as you can without touching the transfer and allow the transfer to warm up for 30-60 seconds and this process will remove moisture from the transfer. This moisture in the ink builds up during the mailing process. \u003cbr\u003eAfter the transfer is warmed up, it is ready for step 2.\u003cbr\u003eUse Medium to heavy Pressure to press the moisture out of your shirt and then press the transfer on the shirt for 15 seconds, let cool completely and peel. \u003cbr\u003eIf there are small elements in the design, let it cool completely before removing the transfer film.\u003cbr\u003eUse a cover sheet (Teflon or white butcher paper\/copier paper) after you’ve peeled the transfer, press again for 5-10 seconds.\u003cbr\u003e-If printing small print or small text, press for 20 seconds using heavy pressure and let the transfer cool before peeling. If for any reason that the print begins to lift off the shirt, usually due to an inexpensive heat press Don’t freak out, STOP PEELING AND PRESS IT AGAIN. Most likely your heat press has uneven pressure and heat.\u003cbr\u003eMachine wash cold\u003cbr\u003eTumble dry low\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSublimation Transfers\u003cbr\u003eThis transfer is to be used with your heat press for applying designs to your shirts, can coolers, or any sublimation blanks.\u003cbr\u003eA HEAT PRESS is a MUST to applying any Ready to Press Designs. (An iron will NOT work)\u003cbr\u003e• High Poly Tee (at least 65% Poly. 100% is best) or any Sublimation Blank to press the design on.\u003cbr\u003e• Your Heat Press should be set to 385 - 400 Degrees F\u003cbr\u003e• Medium Pressure\u003cbr\u003e• For 60 Seconds.\u003cbr\u003e• Pre-press your garment for 3-5 seconds to remove any moisture\u003cbr\u003e• Place a sheet of paper inside the garment, (copy paper is fine). Directly under where you are putting the design.\u003cbr\u003e• Place your sublimation print face down on the garment\u003cbr\u003e• Cover with white butcher paper.\u003cbr\u003e• Press\u003cbr\u003e• Remove Butcher paper and Transfer Print immediately after pressing\u003cbr\u003e**** Times, temperature, and pressure may vary slightly with different heat presses ****\u003cbr\u003e\u003cbr\u003e• Sizes are listed as general popular sizes most commonly ordered for tees.\u003cbr\u003e• All transfers are non-refundable.\u003cbr\u003e• No returns are accepted.\u003cbr\u003e• When you purchase this Ready to Press Transfer, you are agreeing that you are responsible of any outcome of your end product, and that you will be using the correct equipment needed. You are also agreeing that you have fully read the instructions, and you understand the application errors are the responsibility of the buyer (you).\u003cbr\u003e\u003cbr\u003e**** CCMbyCrystal is NOT responsible for lost or stolen mail.***\u003c\/p\u003e\n\u003c\/div\u003e","brand":"CCMbyCrystal","offers":[{"title":"22 X 60","offer_id":42264208081079,"sku":null,"price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0266\/7043\/2439\/files\/Untitled.jpg?v=1707096451"},{"product_id":"pre-made-western-valentines-gang-sheet-60-dtf-gang-sheet","title":"Pre-Made Western Valentines GANG Sheet 60\" DTF Gang Sheet","description":"\u003cdiv style=\"text-align: center;\"\u003e\n\u003cp\u003eValentine Gang Sheet - All Designs are 11\" Longest side.\u003cbr\u003eThis is a physical print out that will be mailed to you.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDTF Transfers can go on any T-shirt. It has a thinner feel than vinyl.\u003cbr\u003e\u003cbr\u003e**Must use a Heat Press****\u003cbr\u003ePressing Instructions\u003cbr\u003eDTF - Heat press temperature should be set to Polyester and Polyester Blends 285-Cotton 300 F.\u003cbr\u003ePrior to heat pressing, hover the heat press over the transfer INK SIDE UP as close as you can without touching the transfer and allow the transfer to warm up for 30-60 seconds and this process will remove moisture from the transfer. This moisture in the ink builds up during the mailing process. \u003cbr\u003eAfter the transfer is warmed up, it is ready for step 2.\u003cbr\u003eUse Medium to heavy Pressure to press the moisture out of your shirt and then press the transfer on the shirt for 15 seconds, let cool completely and peel. \u003cbr\u003eIf there are small elements in the design, let it cool completely before removing the transfer film.\u003cbr\u003eUse a cover sheet (Teflon or white butcher paper\/copier paper) after you’ve peeled the transfer, press again for 5-10 seconds.\u003cbr\u003e-If printing small print or small text, press for 20 seconds using heavy pressure and let the transfer cool before peeling. If for any reason that the print begins to lift off the shirt, usually due to an inexpensive heat press Don’t freak out, STOP PEELING AND PRESS IT AGAIN. Most likely your heat press has uneven pressure and heat.\u003cbr\u003eMachine wash cold\u003cbr\u003eTumble dry low\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSublimation Transfers\u003cbr\u003eThis transfer is to be used with your heat press for applying designs to your shirts, can coolers, or any sublimation blanks.\u003cbr\u003eA HEAT PRESS is a MUST to applying any Ready to Press Designs. (An iron will NOT work)\u003cbr\u003e• High Poly Tee (at least 65% Poly. 100% is best) or any Sublimation Blank to press the design on.\u003cbr\u003e• Your Heat Press should be set to 385 - 400 Degrees F\u003cbr\u003e• Medium Pressure\u003cbr\u003e• For 60 Seconds.\u003cbr\u003e• Pre-press your garment for 3-5 seconds to remove any moisture\u003cbr\u003e• Place a sheet of paper inside the garment, (copy paper is fine). Directly under where you are putting the design.\u003cbr\u003e• Place your sublimation print face down on the garment\u003cbr\u003e• Cover with white butcher paper.\u003cbr\u003e• Press\u003cbr\u003e• Remove Butcher paper and Transfer Print immediately after pressing\u003cbr\u003e**** Times, temperature, and pressure may vary slightly with different heat presses ****\u003cbr\u003e\u003cbr\u003e• Sizes are listed as general popular sizes most commonly ordered for tees.\u003cbr\u003e• All transfers are non-refundable.\u003cbr\u003e• No returns are accepted.\u003cbr\u003e• When you purchase this Ready to Press Transfer, you are agreeing that you are responsible of any outcome of your end product, and that you will be using the correct equipment needed. You are also agreeing that you have fully read the instructions, and you understand the application errors are the responsibility of the buyer (you).\u003cbr\u003e\u003cbr\u003e**** CCMbyCrystal is NOT responsible for lost or stolen mail.***\u003c\/p\u003e\n\u003c\/div\u003e","brand":"CCMbyCrystal","offers":[{"title":"22 X 60","offer_id":42264220795063,"sku":null,"price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0266\/7043\/2439\/files\/western.jpg?v=1707098237"},{"product_id":"baseball-gang-sheet-60-dtf-gang-sheet","title":"Baseball GANG Sheet 60\" DTF Gang Sheet","description":"\u003cdiv style=\"text-align: center;\"\u003e\n\u003cp\u003eValentine Gang Sheet - All Designs are 11\" Longest side.\u003cbr\u003eThis is a physical print out that will be mailed to you.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDTF Transfers can go on any T-shirt. It has a thinner feel than vinyl.\u003cbr\u003e\u003cbr\u003e**Must use a Heat Press****\u003cbr\u003ePressing Instructions\u003cbr\u003eDTF - Heat press temperature should be set to Polyester and Polyester Blends 285-Cotton 300 F.\u003cbr\u003ePrior to heat pressing, hover the heat press over the transfer INK SIDE UP as close as you can without touching the transfer and allow the transfer to warm up for 30-60 seconds and this process will remove moisture from the transfer. This moisture in the ink builds up during the mailing process. \u003cbr\u003eAfter the transfer is warmed up, it is ready for step 2.\u003cbr\u003eUse Medium to heavy Pressure to press the moisture out of your shirt and then press the transfer on the shirt for 15 seconds, let cool completely and peel. \u003cbr\u003eIf there are small elements in the design, let it cool completely before removing the transfer film.\u003cbr\u003eUse a cover sheet (Teflon or white butcher paper\/copier paper) after you’ve peeled the transfer, press again for 5-10 seconds.\u003cbr\u003e-If printing small print or small text, press for 20 seconds using heavy pressure and let the transfer cool before peeling. If for any reason that the print begins to lift off the shirt, usually due to an inexpensive heat press Don’t freak out, STOP PEELING AND PRESS IT AGAIN. Most likely your heat press has uneven pressure and heat.\u003cbr\u003eMachine wash cold\u003cbr\u003eTumble dry low\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSublimation Transfers\u003cbr\u003eThis transfer is to be used with your heat press for applying designs to your shirts, can coolers, or any sublimation blanks.\u003cbr\u003eA HEAT PRESS is a MUST to applying any Ready to Press Designs. (An iron will NOT work)\u003cbr\u003e• High Poly Tee (at least 65% Poly. 100% is best) or any Sublimation Blank to press the design on.\u003cbr\u003e• Your Heat Press should be set to 385 - 400 Degrees F\u003cbr\u003e• Medium Pressure\u003cbr\u003e• For 60 Seconds.\u003cbr\u003e• Pre-press your garment for 3-5 seconds to remove any moisture\u003cbr\u003e• Place a sheet of paper inside the garment, (copy paper is fine). Directly under where you are putting the design.\u003cbr\u003e• Place your sublimation print face down on the garment\u003cbr\u003e• Cover with white butcher paper.\u003cbr\u003e• Press\u003cbr\u003e• Remove Butcher paper and Transfer Print immediately after pressing\u003cbr\u003e**** Times, temperature, and pressure may vary slightly with different heat presses ****\u003cbr\u003e\u003cbr\u003e• Sizes are listed as general popular sizes most commonly ordered for tees.\u003cbr\u003e• All transfers are non-refundable.\u003cbr\u003e• No returns are accepted.\u003cbr\u003e• When you purchase this Ready to Press Transfer, you are agreeing that you are responsible of any outcome of your end product, and that you will be using the correct equipment needed. You are also agreeing that you have fully read the instructions, and you understand the application errors are the responsibility of the buyer (you).\u003cbr\u003e\u003cbr\u003e**** CCMbyCrystal is NOT responsible for lost or stolen mail.***\u003c\/p\u003e\n\u003c\/div\u003e","brand":"CCMbyCrystal","offers":[{"title":"22 X 60","offer_id":42280163147959,"sku":null,"price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0266\/7043\/2439\/files\/premadebaseball1.jpg?v=1707504862"},{"product_id":"softball-gang-sheet-60-dtf-gang-sheet","title":"Softball GANG Sheet 60\" DTF Gang Sheet","description":"\u003cdiv style=\"text-align: center;\"\u003e\n\u003cp\u003eValentine Gang Sheet - Most Designs are 11\" Longest side.\u003c\/p\u003e\n\u003cp\u003eSoftball Sister and Softball Brother are Youth 9\" Longest side\u003cbr\u003eThis is a physical print out that will be mailed to you.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDTF Transfers can go on any T-shirt. It has a thinner feel than vinyl.\u003cbr\u003e\u003cbr\u003e**Must use a Heat Press****\u003cbr\u003ePressing Instructions\u003cbr\u003eDTF - Heat press temperature should be set to Polyester and Polyester Blends 285-Cotton 300 F.\u003cbr\u003ePrior to heat pressing, hover the heat press over the transfer INK SIDE UP as close as you can without touching the transfer and allow the transfer to warm up for 30-60 seconds and this process will remove moisture from the transfer. This moisture in the ink builds up during the mailing process. \u003cbr\u003eAfter the transfer is warmed up, it is ready for step 2.\u003cbr\u003eUse Medium to heavy Pressure to press the moisture out of your shirt and then press the transfer on the shirt for 15 seconds, let cool completely and peel. \u003cbr\u003eIf there are small elements in the design, let it cool completely before removing the transfer film.\u003cbr\u003eUse a cover sheet (Teflon or white butcher paper\/copier paper) after you’ve peeled the transfer, press again for 5-10 seconds.\u003cbr\u003e-If printing small print or small text, press for 20 seconds using heavy pressure and let the transfer cool before peeling. If for any reason that the print begins to lift off the shirt, usually due to an inexpensive heat press Don’t freak out, STOP PEELING AND PRESS IT AGAIN. Most likely your heat press has uneven pressure and heat.\u003cbr\u003eMachine wash cold\u003cbr\u003eTumble dry low\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSublimation Transfers\u003cbr\u003eThis transfer is to be used with your heat press for applying designs to your shirts, can coolers, or any sublimation blanks.\u003cbr\u003eA HEAT PRESS is a MUST to applying any Ready to Press Designs. (An iron will NOT work)\u003cbr\u003e• High Poly Tee (at least 65% Poly. 100% is best) or any Sublimation Blank to press the design on.\u003cbr\u003e• Your Heat Press should be set to 385 - 400 Degrees F\u003cbr\u003e• Medium Pressure\u003cbr\u003e• For 60 Seconds.\u003cbr\u003e• Pre-press your garment for 3-5 seconds to remove any moisture\u003cbr\u003e• Place a sheet of paper inside the garment, (copy paper is fine). Directly under where you are putting the design.\u003cbr\u003e• Place your sublimation print face down on the garment\u003cbr\u003e• Cover with white butcher paper.\u003cbr\u003e• Press\u003cbr\u003e• Remove Butcher paper and Transfer Print immediately after pressing\u003cbr\u003e**** Times, temperature, and pressure may vary slightly with different heat presses ****\u003cbr\u003e\u003cbr\u003e• Sizes are listed as general popular sizes most commonly ordered for tees.\u003cbr\u003e• All transfers are non-refundable.\u003cbr\u003e• No returns are accepted.\u003cbr\u003e• When you purchase this Ready to Press Transfer, you are agreeing that you are responsible of any outcome of your end product, and that you will be using the correct equipment needed. You are also agreeing that you have fully read the instructions, and you understand the application errors are the responsibility of the buyer (you).\u003cbr\u003e\u003cbr\u003e**** CCMbyCrystal is NOT responsible for lost or stolen mail.***\u003c\/p\u003e\n\u003c\/div\u003e","brand":"CCMbyCrystal","offers":[{"title":"22 X 60","offer_id":42280163934391,"sku":null,"price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0266\/7043\/2439\/files\/softballpremade1.jpg?v=1707504943"},{"product_id":"sublimation-gang-sheet","title":"Sublimation Gang Sheet","description":"\u003cdiv style=\"text-align: center;\"\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e***RESIZING AND COLOR CORRECTIONS ARE NOT AVAILABLE ON GANG SHEET ORDERS.  GANG SHEETS MUST BE PRINT READY***\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eTo Order:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003ePlease upload your image(s) by clicking the “Create Gang Sheet Button”.\u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003e  \u003c\/span\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cspan\u003e\u003cem\u003ePlease ensure the sizing and coloring is correct as it will be printed exactly as it is uploaded.\u003c\/em\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eOnce your artwork is formatted, you will be prompted to return to the product page.  Click “Redirect”\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan color=\"#2b00ff\"\u003e\u003cspan\u003eAdd the desired quantity and then click “Add to Cart.”\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFor the best quality prints, we recommend you upload a TRANSPARENT PNG image with a 300 dpi. \u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\n\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\n\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003ePressing Instructions\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\n\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003eSublimation Transfers\u003cbr\u003eThis transfer is to be used with your heat press for applying designs to your shirts, can coolers, or any sublimation blanks.\u003cbr\u003eA HEAT PRESS is a MUST to applying any Ready to Press Designs. (An iron will NOT work)\u003cbr\u003e• High Poly Tee (at least 65% Poly. 100% is best) or any Sublimation Blank to press the design on.\u003cbr\u003e• Your Heat Press should be set to 385 - 400 Degrees F\u003cbr\u003e• Medium Pressure\u003cbr\u003e• For 60 Seconds.\u003cbr\u003e• Pre-press your garment for 3-5 seconds to remove any moisture\u003cbr\u003e• Place a sheet of paper inside the garment, (copy paper is fine). Directly under where you are putting the design.\u003cbr\u003e• Place your sublimation print face down on the garment\u003cbr\u003e• Cover with white butcher paper.\u003cbr\u003e• Press\u003cbr\u003e• Remove Butcher paper and Transfer Print immediately after pressing\u003cbr\u003e**** Times, temperature, and pressure may vary slightly with different heat presses ****\u003cbr\u003e\u003cbr\u003e• Sizes are listed as general popular sizes most commonly ordered for tees.\u003cbr\u003e• All transfers are non-refundable.\u003cbr\u003e• No returns are accepted.\u003cbr\u003e• When you purchase this Ready to Press Transfer, you are agreeing that you are responsible of any outcome of your end product, and that you will be using the correct equipment needed. You are also agreeing that you have fully read the instructions, and you understand the application errors are the responsibility of the buyer (you).\u003cbr\u003e\u003cbr\u003e**** CCMbyCrystal is NOT responsible for lost or stolen mail.***\u003c\/div\u003e","brand":"CCMbyCrystal","offers":[{"title":"23x48","offer_id":42451563905207,"sku":null,"price":22.5,"currency_code":"USD","in_stock":true},{"title":"23x60","offer_id":42451563937975,"sku":null,"price":28.0,"currency_code":"USD","in_stock":true},{"title":"23x72","offer_id":42451563970743,"sku":null,"price":33.0,"currency_code":"USD","in_stock":true},{"title":"23x84","offer_id":42451564003511,"sku":null,"price":38.0,"currency_code":"USD","in_stock":true},{"title":"23x96","offer_id":42451564036279,"sku":null,"price":42.5,"currency_code":"USD","in_stock":true},{"title":"23x120","offer_id":42451564069047,"sku":null,"price":52.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0266\/7043\/2439\/files\/SUBLIMATIONGANGSHEET.jpg?v=1712763931"},{"product_id":"pink-christmas-gang-sheet-60-dtf-gang-sheet","title":"Pink Christmas GANG Sheet 60\" DTF Gang Sheet","description":"\u003cdiv style=\"text-align: center;\"\u003e\n\u003cp\u003eValentine Gang Sheet - Most Designs are 11\" Longest side.\u003c\/p\u003e\n\u003cp\u003eSoftball Sister and Softball Brother are Youth 9\" Longest side\u003cbr\u003eThis is a physical print out that will be mailed to you.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDTF Transfers can go on any T-shirt. It has a thinner feel than vinyl.\u003cbr\u003e\u003cbr\u003e**Must use a Heat Press****\u003cbr\u003ePressing Instructions\u003cbr\u003eDTF - Heat press temperature should be set to Polyester and Polyester Blends 285-Cotton 300 F.\u003cbr\u003ePrior to heat pressing, hover the heat press over the transfer INK SIDE UP as close as you can without touching the transfer and allow the transfer to warm up for 30-60 seconds and this process will remove moisture from the transfer. This moisture in the ink builds up during the mailing process. \u003cbr\u003eAfter the transfer is warmed up, it is ready for step 2.\u003cbr\u003eUse Medium to heavy Pressure to press the moisture out of your shirt and then press the transfer on the shirt for 15 seconds, let cool completely and peel. \u003cbr\u003eIf there are small elements in the design, let it cool completely before removing the transfer film.\u003cbr\u003eUse a cover sheet (Teflon or white butcher paper\/copier paper) after you’ve peeled the transfer, press again for 5-10 seconds.\u003cbr\u003e-If printing small print or small text, press for 20 seconds using heavy pressure and let the transfer cool before peeling. If for any reason that the print begins to lift off the shirt, usually due to an inexpensive heat press Don’t freak out, STOP PEELING AND PRESS IT AGAIN. Most likely your heat press has uneven pressure and heat.\u003cbr\u003eMachine wash cold\u003cbr\u003eTumble dry low\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSublimation Transfers\u003cbr\u003eThis transfer is to be used with your heat press for applying designs to your shirts, can coolers, or any sublimation blanks.\u003cbr\u003eA HEAT PRESS is a MUST to applying any Ready to Press Designs. (An iron will NOT work)\u003cbr\u003e• High Poly Tee (at least 65% Poly. 100% is best) or any Sublimation Blank to press the design on.\u003cbr\u003e• Your Heat Press should be set to 385 - 400 Degrees F\u003cbr\u003e• Medium Pressure\u003cbr\u003e• For 60 Seconds.\u003cbr\u003e• Pre-press your garment for 3-5 seconds to remove any moisture\u003cbr\u003e• Place a sheet of paper inside the garment, (copy paper is fine). Directly under where you are putting the design.\u003cbr\u003e• Place your sublimation print face down on the garment\u003cbr\u003e• Cover with white butcher paper.\u003cbr\u003e• Press\u003cbr\u003e• Remove Butcher paper and Transfer Print immediately after pressing\u003cbr\u003e**** Times, temperature, and pressure may vary slightly with different heat presses ****\u003cbr\u003e\u003cbr\u003e• Sizes are listed as general popular sizes most commonly ordered for tees.\u003cbr\u003e• All transfers are non-refundable.\u003cbr\u003e• No returns are accepted.\u003cbr\u003e• When you purchase this Ready to Press Transfer, you are agreeing that you are responsible of any outcome of your end product, and that you will be using the correct equipment needed. You are also agreeing that you have fully read the instructions, and you understand the application errors are the responsibility of the buyer (you).\u003cbr\u003e\u003cbr\u003e**** CCMbyCrystal is NOT responsible for lost or stolen mail.***\u003c\/p\u003e\n\u003c\/div\u003e","brand":"CCMbyCrystal","offers":[{"title":"22 X 60","offer_id":43729706090679,"sku":null,"price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0266\/7043\/2439\/files\/pinkgang.jpg?v=1729112352"},{"product_id":"halloween-gang-sheet-60-dtf-gang-sheet","title":"Halloween GANG Sheet 60\" DTF Gang Sheet","description":"\u003cdiv style=\"text-align: center;\"\u003e\n\u003cp\u003eValentine Gang Sheet - Most Designs are 11\" Longest side.\u003c\/p\u003e\n\u003cp\u003eSoftball Sister and Softball Brother are Youth 9\" Longest side\u003cbr\u003eThis is a physical print out that will be mailed to you.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDTF Transfers can go on any T-shirt. It has a thinner feel than vinyl.\u003cbr\u003e\u003cbr\u003e**Must use a Heat Press****\u003cbr\u003ePressing Instructions\u003cbr\u003eDTF - Heat press temperature should be set to Polyester and Polyester Blends 285-Cotton 300 F.\u003cbr\u003ePrior to heat pressing, hover the heat press over the transfer INK SIDE UP as close as you can without touching the transfer and allow the transfer to warm up for 30-60 seconds and this process will remove moisture from the transfer. This moisture in the ink builds up during the mailing process. \u003cbr\u003eAfter the transfer is warmed up, it is ready for step 2.\u003cbr\u003eUse Medium to heavy Pressure to press the moisture out of your shirt and then press the transfer on the shirt for 15 seconds, let cool completely and peel. \u003cbr\u003eIf there are small elements in the design, let it cool completely before removing the transfer film.\u003cbr\u003eUse a cover sheet (Teflon or white butcher paper\/copier paper) after you’ve peeled the transfer, press again for 5-10 seconds.\u003cbr\u003e-If printing small print or small text, press for 20 seconds using heavy pressure and let the transfer cool before peeling. If for any reason that the print begins to lift off the shirt, usually due to an inexpensive heat press Don’t freak out, STOP PEELING AND PRESS IT AGAIN. Most likely your heat press has uneven pressure and heat.\u003cbr\u003eMachine wash cold\u003cbr\u003eTumble dry low\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSublimation Transfers\u003cbr\u003eThis transfer is to be used with your heat press for applying designs to your shirts, can coolers, or any sublimation blanks.\u003cbr\u003eA HEAT PRESS is a MUST to applying any Ready to Press Designs. (An iron will NOT work)\u003cbr\u003e• High Poly Tee (at least 65% Poly. 100% is best) or any Sublimation Blank to press the design on.\u003cbr\u003e• Your Heat Press should be set to 385 - 400 Degrees F\u003cbr\u003e• Medium Pressure\u003cbr\u003e• For 60 Seconds.\u003cbr\u003e• Pre-press your garment for 3-5 seconds to remove any moisture\u003cbr\u003e• Place a sheet of paper inside the garment, (copy paper is fine). Directly under where you are putting the design.\u003cbr\u003e• Place your sublimation print face down on the garment\u003cbr\u003e• Cover with white butcher paper.\u003cbr\u003e• Press\u003cbr\u003e• Remove Butcher paper and Transfer Print immediately after pressing\u003cbr\u003e**** Times, temperature, and pressure may vary slightly with different heat presses ****\u003cbr\u003e\u003cbr\u003e• Sizes are listed as general popular sizes most commonly ordered for tees.\u003cbr\u003e• All transfers are non-refundable.\u003cbr\u003e• No returns are accepted.\u003cbr\u003e• When you purchase this Ready to Press Transfer, you are agreeing that you are responsible of any outcome of your end product, and that you will be using the correct equipment needed. You are also agreeing that you have fully read the instructions, and you understand the application errors are the responsibility of the buyer (you).\u003cbr\u003e\u003cbr\u003e**** CCMbyCrystal is NOT responsible for lost or stolen mail.***\u003c\/p\u003e\n\u003c\/div\u003e","brand":"CCMbyCrystal","offers":[{"title":"22 X 60","offer_id":43734308913335,"sku":null,"price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0266\/7043\/2439\/files\/HALLOWEENGANG_a2127e04-94e2-4a97-ab74-805749506b11.jpg?v=1729174008"},{"product_id":"pink-halloween-gang-sheet-60-dtf-gang-sheet","title":"Pink Halloween GANG Sheet 60\" DTF Gang Sheet","description":"\u003cdiv style=\"text-align: center;\"\u003e\n\u003cp\u003eValentine Gang Sheet - Most Designs are 11\" Longest side.\u003c\/p\u003e\n\u003cp\u003eSoftball Sister and Softball Brother are Youth 9\" Longest side\u003cbr\u003eThis is a physical print out that will be mailed to you.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDTF Transfers can go on any T-shirt. It has a thinner feel than vinyl.\u003cbr\u003e\u003cbr\u003e**Must use a Heat Press****\u003cbr\u003ePressing Instructions\u003cbr\u003eDTF - Heat press temperature should be set to Polyester and Polyester Blends 285-Cotton 300 F.\u003cbr\u003ePrior to heat pressing, hover the heat press over the transfer INK SIDE UP as close as you can without touching the transfer and allow the transfer to warm up for 30-60 seconds and this process will remove moisture from the transfer. This moisture in the ink builds up during the mailing process. \u003cbr\u003eAfter the transfer is warmed up, it is ready for step 2.\u003cbr\u003eUse Medium to heavy Pressure to press the moisture out of your shirt and then press the transfer on the shirt for 15 seconds, let cool completely and peel. \u003cbr\u003eIf there are small elements in the design, let it cool completely before removing the transfer film.\u003cbr\u003eUse a cover sheet (Teflon or white butcher paper\/copier paper) after you’ve peeled the transfer, press again for 5-10 seconds.\u003cbr\u003e-If printing small print or small text, press for 20 seconds using heavy pressure and let the transfer cool before peeling. If for any reason that the print begins to lift off the shirt, usually due to an inexpensive heat press Don’t freak out, STOP PEELING AND PRESS IT AGAIN. Most likely your heat press has uneven pressure and heat.\u003cbr\u003eMachine wash cold\u003cbr\u003eTumble dry low\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSublimation Transfers\u003cbr\u003eThis transfer is to be used with your heat press for applying designs to your shirts, can coolers, or any sublimation blanks.\u003cbr\u003eA HEAT PRESS is a MUST to applying any Ready to Press Designs. (An iron will NOT work)\u003cbr\u003e• High Poly Tee (at least 65% Poly. 100% is best) or any Sublimation Blank to press the design on.\u003cbr\u003e• Your Heat Press should be set to 385 - 400 Degrees F\u003cbr\u003e• Medium Pressure\u003cbr\u003e• For 60 Seconds.\u003cbr\u003e• Pre-press your garment for 3-5 seconds to remove any moisture\u003cbr\u003e• Place a sheet of paper inside the garment, (copy paper is fine). Directly under where you are putting the design.\u003cbr\u003e• Place your sublimation print face down on the garment\u003cbr\u003e• Cover with white butcher paper.\u003cbr\u003e• Press\u003cbr\u003e• Remove Butcher paper and Transfer Print immediately after pressing\u003cbr\u003e**** Times, temperature, and pressure may vary slightly with different heat presses ****\u003cbr\u003e\u003cbr\u003e• Sizes are listed as general popular sizes most commonly ordered for tees.\u003cbr\u003e• All transfers are non-refundable.\u003cbr\u003e• No returns are accepted.\u003cbr\u003e• When you purchase this Ready to Press Transfer, you are agreeing that you are responsible of any outcome of your end product, and that you will be using the correct equipment needed. You are also agreeing that you have fully read the instructions, and you understand the application errors are the responsibility of the buyer (you).\u003cbr\u003e\u003cbr\u003e**** CCMbyCrystal is NOT responsible for lost or stolen mail.***\u003c\/p\u003e\n\u003c\/div\u003e","brand":"CCMbyCrystal","offers":[{"title":"22 X 60","offer_id":43734352527543,"sku":null,"price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0266\/7043\/2439\/files\/PINKHALLOWEEN.jpg?v=1729174832"},{"product_id":"christmas-gang-sheet-60-dtf-gang-sheet","title":"Christmas GANG Sheet 60\" DTF Gang Sheet","description":"\u003cdiv style=\"text-align: center;\"\u003e\n\u003cp\u003eValentine Gang Sheet - Most Designs are 11\" Longest side.\u003c\/p\u003e\n\u003cp\u003eSoftball Sister and Softball Brother are Youth 9\" Longest side\u003cbr\u003eThis is a physical print out that will be mailed to you.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDTF Transfers can go on any T-shirt. It has a thinner feel than vinyl.\u003cbr\u003e\u003cbr\u003e**Must use a Heat Press****\u003cbr\u003ePressing Instructions\u003cbr\u003eDTF - Heat press temperature should be set to Polyester and Polyester Blends 285-Cotton 300 F.\u003cbr\u003ePrior to heat pressing, hover the heat press over the transfer INK SIDE UP as close as you can without touching the transfer and allow the transfer to warm up for 30-60 seconds and this process will remove moisture from the transfer. This moisture in the ink builds up during the mailing process. \u003cbr\u003eAfter the transfer is warmed up, it is ready for step 2.\u003cbr\u003eUse Medium to heavy Pressure to press the moisture out of your shirt and then press the transfer on the shirt for 15 seconds, let cool completely and peel. \u003cbr\u003eIf there are small elements in the design, let it cool completely before removing the transfer film.\u003cbr\u003eUse a cover sheet (Teflon or white butcher paper\/copier paper) after you’ve peeled the transfer, press again for 5-10 seconds.\u003cbr\u003e-If printing small print or small text, press for 20 seconds using heavy pressure and let the transfer cool before peeling. If for any reason that the print begins to lift off the shirt, usually due to an inexpensive heat press Don’t freak out, STOP PEELING AND PRESS IT AGAIN. Most likely your heat press has uneven pressure and heat.\u003cbr\u003eMachine wash cold\u003cbr\u003eTumble dry low\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSublimation Transfers\u003cbr\u003eThis transfer is to be used with your heat press for applying designs to your shirts, can coolers, or any sublimation blanks.\u003cbr\u003eA HEAT PRESS is a MUST to applying any Ready to Press Designs. (An iron will NOT work)\u003cbr\u003e• High Poly Tee (at least 65% Poly. 100% is best) or any Sublimation Blank to press the design on.\u003cbr\u003e• Your Heat Press should be set to 385 - 400 Degrees F\u003cbr\u003e• Medium Pressure\u003cbr\u003e• For 60 Seconds.\u003cbr\u003e• Pre-press your garment for 3-5 seconds to remove any moisture\u003cbr\u003e• Place a sheet of paper inside the garment, (copy paper is fine). Directly under where you are putting the design.\u003cbr\u003e• Place your sublimation print face down on the garment\u003cbr\u003e• Cover with white butcher paper.\u003cbr\u003e• Press\u003cbr\u003e• Remove Butcher paper and Transfer Print immediately after pressing\u003cbr\u003e**** Times, temperature, and pressure may vary slightly with different heat presses ****\u003cbr\u003e\u003cbr\u003e• Sizes are listed as general popular sizes most commonly ordered for tees.\u003cbr\u003e• All transfers are non-refundable.\u003cbr\u003e• No returns are accepted.\u003cbr\u003e• When you purchase this Ready to Press Transfer, you are agreeing that you are responsible of any outcome of your end product, and that you will be using the correct equipment needed. You are also agreeing that you have fully read the instructions, and you understand the application errors are the responsibility of the buyer (you).\u003cbr\u003e\u003cbr\u003e**** CCMbyCrystal is NOT responsible for lost or stolen mail.***\u003c\/p\u003e\n\u003c\/div\u003e","brand":"CCMbyCrystal","offers":[{"title":"22 X 60","offer_id":43734396633271,"sku":null,"price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0266\/7043\/2439\/files\/christmasgang.jpg?v=1729175656"},{"product_id":"18-wrap-16-oz-glass-can-christmas-gang-sheets-for-uv-dtf-transfers-read-description","title":"Pre Made Christmas 18 Wrap 16 oz Glass Can Gang Sheets for UV DTF Transfers READ Description","description":"\u003cdiv style=\"text-align: center;\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\n\u003cp\u003eUV DTF GANG SHEET- All Designs are 9.6\" Longest side by 4.6\"\u003cbr\u003e15.75X64\u003cbr\u003e16 oz Glass Can Wraps\u003c\/p\u003e\n\u003cp\u003eThis is a physical print out that will be mailed to you.\u003c\/p\u003e\n\u003cp\u003eUV DTF Instructions\u003cbr\u003ePlease wait a minimum of 24-28 hours before hand washing your glass gently in warm water. Do not use anything abrasive to wash the outside of your glass. Do no soak. Microwave and dishwasher are not recommended.\u003c\/p\u003e\n\u003cp\u003e                 1.  Clean glass.\u003c\/p\u003e\n\u003cp\u003e                 2.  Peel design transfer off paper backing. \u003c\/p\u003e\n\u003cp\u003e                 3.  Align and place the transfer on the cup.\u003c\/p\u003e\n\u003cp\u003e                 4.  Working from the center outwards, press the transfer down.  Use your\u003cbr\u003e                       fingers or a squeegee to push out any bubbles.\u003c\/p\u003e\n\u003cp\u003e                 5.  Peel the clear film off slowly. \u003c\/p\u003e\n\u003cp\u003e***  Once the transfer is on the glass, you cannot reposition it.  ***\u003c\/p\u003e\n\u003cp\u003eYouTube is a great place to start for application tips and tricks.\u003c\/p\u003e\n\u003cp\u003e• All transfers are non-refundable.\u003cbr\u003e• No returns are accepted.\u003c\/p\u003e\n\u003cp\u003e• When you purchase this UV DTF Transfer, you are agreeing that you are responsible of any outcome of your end product, and that you will be using the correct equipment needed. You are also agreeing that you have fully read the instructions, and you understand the application errors are the responsibility of the buyer (you).\u003cbr\u003e**** CCMbyCrystal is NOT responsible for lost or stolen mail.****\u003c\/p\u003e\n\u003c\/div\u003e","brand":"CCMbyCrystal","offers":[{"title":"15.75\"x64\"","offer_id":43786056007863,"sku":null,"price":33.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0266\/7043\/2439\/files\/uvchristmasgang.jpg?v=1729869600"},{"product_id":"pre-made-halloween-18-wrap-16-oz-glass-can-gang-sheets-for-uv-dtf-transfers-read-description","title":"Pre Made Halloween 18 Wrap 16 oz Glass Can Gang Sheets for UV DTF Transfers READ Description","description":"\u003cdiv style=\"text-align: center;\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\n\u003cp\u003eUV DTF GANG SHEET- All Designs are 9.6\" Longest side by 4.6\"\u003cbr\u003e15.75X64\u003cbr\u003e16 oz Glass Can Wraps\u003c\/p\u003e\n\u003cp\u003eThis is a physical print out that will be mailed to you.\u003c\/p\u003e\n\u003cp\u003eUV DTF Instructions\u003cbr\u003ePlease wait a minimum of 24-28 hours before hand washing your glass gently in warm water. Do not use anything abrasive to wash the outside of your glass. Do no soak. Microwave and dishwasher are not recommended.\u003c\/p\u003e\n\u003cp\u003e                 1.  Clean glass.\u003c\/p\u003e\n\u003cp\u003e                 2.  Peel design transfer off paper backing. \u003c\/p\u003e\n\u003cp\u003e                 3.  Align and place the transfer on the cup.\u003c\/p\u003e\n\u003cp\u003e                 4.  Working from the center outwards, press the transfer down.  Use your\u003cbr\u003e                       fingers or a squeegee to push out any bubbles.\u003c\/p\u003e\n\u003cp\u003e                 5.  Peel the clear film off slowly. \u003c\/p\u003e\n\u003cp\u003e***  Once the transfer is on the glass, you cannot reposition it.  ***\u003c\/p\u003e\n\u003cp\u003eYouTube is a great place to start for application tips and tricks.\u003c\/p\u003e\n\u003cp\u003e• All transfers are non-refundable.\u003cbr\u003e• No returns are accepted.\u003c\/p\u003e\n\u003cp\u003e• When you purchase this UV DTF Transfer, you are agreeing that you are responsible of any outcome of your end product, and that you will be using the correct equipment needed. You are also agreeing that you have fully read the instructions, and you understand the application errors are the responsibility of the buyer (you).\u003cbr\u003e**** CCMbyCrystal is NOT responsible for lost or stolen mail.****\u003c\/p\u003e\n\u003c\/div\u003e","brand":"CCMbyCrystal","offers":[{"title":"15.75\"x64\"","offer_id":43786071113911,"sku":null,"price":33.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0266\/7043\/2439\/files\/uvhalloweengang.jpg?v=1729869761"},{"product_id":"happy-new-year-2025-pre-made-gang-sheet-60-dtf-gang-sheet","title":"Happy New Year 2025 Pre Made GANG Sheet 60\" DTF Gang Sheet","description":"\u003cdiv style=\"text-align: center;\"\u003e\n\u003cp\u003eAll Designs are 11\" Longest side. Pockets are 4\" Longest side \u003cbr\u003eThis is a physical print out that will be mailed to you.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDTF Transfers can go on any T-shirt. It has a thinner feel than vinyl.\u003cbr\u003e\u003cbr\u003e**Must use a Heat Press****\u003cbr\u003ePressing Instructions\u003cbr\u003eDTF - Heat press temperature should be set to Polyester and Polyester Blends 285-Cotton 300 F.\u003cbr\u003ePrior to heat pressing, hover the heat press over the transfer INK SIDE UP as close as you can without touching the transfer and allow the transfer to warm up for 30-60 seconds and this process will remove moisture from the transfer. This moisture in the ink builds up during the mailing process. \u003cbr\u003eAfter the transfer is warmed up, it is ready for step 2.\u003cbr\u003eUse Medium to heavy Pressure to press the moisture out of your shirt and then press the transfer on the shirt for 15 seconds, let cool completely and peel. \u003cbr\u003eIf there are small elements in the design, let it cool completely before removing the transfer film.\u003cbr\u003eUse a cover sheet (Teflon or white butcher paper\/copier paper) after you’ve peeled the transfer, press again for 5-10 seconds.\u003cbr\u003e-If printing small print or small text, press for 20 seconds using heavy pressure and let the transfer cool before peeling. If for any reason that the print begins to lift off the shirt, usually due to an inexpensive heat press Don’t freak out, STOP PEELING AND PRESS IT AGAIN. Most likely your heat press has uneven pressure and heat.\u003cbr\u003eMachine wash cold\u003cbr\u003eTumble dry low\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSublimation Transfers\u003cbr\u003eThis transfer is to be used with your heat press for applying designs to your shirts, can coolers, or any sublimation blanks.\u003cbr\u003eA HEAT PRESS is a MUST to applying any Ready to Press Designs. (An iron will NOT work)\u003cbr\u003e• High Poly Tee (at least 65% Poly. 100% is best) or any Sublimation Blank to press the design on.\u003cbr\u003e• Your Heat Press should be set to 385 - 400 Degrees F\u003cbr\u003e• Medium Pressure\u003cbr\u003e• For 60 Seconds.\u003cbr\u003e• Pre-press your garment for 3-5 seconds to remove any moisture\u003cbr\u003e• Place a sheet of paper inside the garment, (copy paper is fine). Directly under where you are putting the design.\u003cbr\u003e• Place your sublimation print face down on the garment\u003cbr\u003e• Cover with white butcher paper.\u003cbr\u003e• Press\u003cbr\u003e• Remove Butcher paper and Transfer Print immediately after pressing\u003cbr\u003e**** Times, temperature, and pressure may vary slightly with different heat presses ****\u003cbr\u003e\u003cbr\u003e• Sizes are listed as general popular sizes most commonly ordered for tees.\u003cbr\u003e• All transfers are non-refundable.\u003cbr\u003e• No returns are accepted.\u003cbr\u003e• When you purchase this Ready to Press Transfer, you are agreeing that you are responsible of any outcome of your end product, and that you will be using the correct equipment needed. You are also agreeing that you have fully read the instructions, and you understand the application errors are the responsibility of the buyer (you).\u003cbr\u003e\u003cbr\u003e**** CCMbyCrystal is NOT responsible for lost or stolen mail.***\u003c\/p\u003e\n\u003c\/div\u003e","brand":"CCMbyCrystal","offers":[{"title":"22 X 60","offer_id":44103748714679,"sku":null,"price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0266\/7043\/2439\/files\/new_years_gang.jpg?v=1734547178"},{"product_id":"phil-hobbs-pre-made-gang-sheet-dtf-gang-sheet","title":"Phil Hobbs Pre Made GANG Sheet DTF Gang Sheet","description":"\u003cdiv style=\"text-align: center;\"\u003e\n\u003cp\u003eAll Designs are 11\" Longest side. Pockets are 4\" Longest side \u003cbr\u003eThis is a physical print out that will be mailed to you.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDTF Transfers can go on any T-shirt. It has a thinner feel than vinyl.\u003cbr\u003e\u003cbr\u003e**Must use a Heat Press****\u003cbr\u003ePressing Instructions\u003cbr\u003eDTF - Heat press temperature should be set to Polyester and Polyester Blends 285-Cotton 300 F.\u003cbr\u003ePrior to heat pressing, hover the heat press over the transfer INK SIDE UP as close as you can without touching the transfer and allow the transfer to warm up for 30-60 seconds and this process will remove moisture from the transfer. This moisture in the ink builds up during the mailing process. \u003cbr\u003eAfter the transfer is warmed up, it is ready for step 2.\u003cbr\u003eUse Medium to heavy Pressure to press the moisture out of your shirt and then press the transfer on the shirt for 15 seconds, let cool completely and peel. \u003cbr\u003eIf there are small elements in the design, let it cool completely before removing the transfer film.\u003cbr\u003eUse a cover sheet (Teflon or white butcher paper\/copier paper) after you’ve peeled the transfer, press again for 5-10 seconds.\u003cbr\u003e-If printing small print or small text, press for 20 seconds using heavy pressure and let the transfer cool before peeling. If for any reason that the print begins to lift off the shirt, usually due to an inexpensive heat press Don’t freak out, STOP PEELING AND PRESS IT AGAIN. Most likely your heat press has uneven pressure and heat.\u003cbr\u003eMachine wash cold\u003cbr\u003eTumble dry low\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSublimation Transfers\u003cbr\u003eThis transfer is to be used with your heat press for applying designs to your shirts, can coolers, or any sublimation blanks.\u003cbr\u003eA HEAT PRESS is a MUST to applying any Ready to Press Designs. (An iron will NOT work)\u003cbr\u003e• High Poly Tee (at least 65% Poly. 100% is best) or any Sublimation Blank to press the design on.\u003cbr\u003e• Your Heat Press should be set to 385 - 400 Degrees F\u003cbr\u003e• Medium Pressure\u003cbr\u003e• For 60 Seconds.\u003cbr\u003e• Pre-press your garment for 3-5 seconds to remove any moisture\u003cbr\u003e• Place a sheet of paper inside the garment, (copy paper is fine). Directly under where you are putting the design.\u003cbr\u003e• Place your sublimation print face down on the garment\u003cbr\u003e• Cover with white butcher paper.\u003cbr\u003e• Press\u003cbr\u003e• Remove Butcher paper and Transfer Print immediately after pressing\u003cbr\u003e**** Times, temperature, and pressure may vary slightly with different heat presses ****\u003cbr\u003e\u003cbr\u003e• Sizes are listed as general popular sizes most commonly ordered for tees.\u003cbr\u003e• All transfers are non-refundable.\u003cbr\u003e• No returns are accepted.\u003cbr\u003e• When you purchase this Ready to Press Transfer, you are agreeing that you are responsible of any outcome of your end product, and that you will be using the correct equipment needed. You are also agreeing that you have fully read the instructions, and you understand the application errors are the responsibility of the buyer (you).\u003cbr\u003e\u003cbr\u003e**** CCMbyCrystal is NOT responsible for lost or stolen mail.***\u003c\/p\u003e\n\u003c\/div\u003e","brand":"CCMbyCrystal","offers":[{"title":"1-120 1-60","offer_id":44807601979575,"sku":null,"price":90.0,"currency_code":"USD","in_stock":true}]},{"product_id":"120-pre-made-ice-cream-drip-gang-sheet-all-designs-11-longest-youth-9-longest-side-gang-sheets-dtf-transfers-ready-to-press","title":"120\" Pre-Made Ice Cream Drip Gang Sheet All Designs 11\" Longest Youth 9\" longest side Gang Sheets DTF Transfers Ready to Press","description":"\u003cdiv style=\"text-align: center;\"\u003e\n\u003cp\u003eIce Cream Drip - Designs are 11\" Longest side. Youth Designs are 9'\" longest side. If pockets are on the gang sheet, they are 3.5\".\u003cbr\u003e22X120\"\u003cbr\u003eThis is a physical print out that will be mailed to you.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDTF Transfers can go on any T-shirt. It has a thinner feel than vinyl.\u003cbr\u003e\u003cbr\u003e**Must use a Heat Press****\u003cbr\u003ePressing Instructions\u003cbr\u003eDTF - Heat press temperature should be set to Polyester and Polyester Blends 285-Cotton 300 F.\u003cbr\u003ePrior to heat pressing, hover the heat press over the transfer INK SIDE UP as close as you can without touching the transfer and allow the transfer to warm up for 30-60 seconds and this process will remove moisture from the transfer. This moisture in the ink builds up during the mailing process. \u003cbr\u003eAfter the transfer is warmed up, it is ready for step 2.\u003cbr\u003eUse Medium to heavy Pressure to press the moisture out of your shirt and then press the transfer on the shirt for 15 seconds, let cool completely and peel. \u003cbr\u003eIf there are small elements in the design, let it cool completely before removing the transfer film.\u003cbr\u003eUse a cover sheet (Teflon or white butcher paper\/copier paper) after you’ve peeled the transfer, press again for 5-10 seconds.\u003cbr\u003e-If printing small print or small text, press for 20 seconds using heavy pressure and let the transfer cool before peeling. If for any reason that the print begins to lift off the shirt, usually due to an inexpensive heat press Don’t freak out, STOP PEELING AND PRESS IT AGAIN. Most likely your heat press has uneven pressure and heat.\u003cbr\u003eMachine wash cold\u003cbr\u003eTumble dry low\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSublimation Transfers\u003cbr\u003eThis transfer is to be used with your heat press for applying designs to your shirts, can coolers, or any sublimation blanks.\u003cbr\u003eA HEAT PRESS is a MUST to applying any Ready to Press Designs. (An iron will NOT work)\u003cbr\u003e• High Poly Tee (at least 65% Poly. 100% is best) or any Sublimation Blank to press the design on.\u003cbr\u003e• Your Heat Press should be set to 385 - 400 Degrees F\u003cbr\u003e• Medium Pressure\u003cbr\u003e• For 60 Seconds.\u003cbr\u003e• Pre-press your garment for 3-5 seconds to remove any moisture\u003cbr\u003e• Place a sheet of paper inside the garment, (copy paper is fine). Directly under where you are putting the design.\u003cbr\u003e• Place your sublimation print face down on the garment\u003cbr\u003e• Cover with white butcher paper.\u003cbr\u003e• Press\u003cbr\u003e• Remove Butcher paper and Transfer Print immediately after pressing\u003cbr\u003e**** Times, temperature, and pressure may vary slightly with different heat presses ****\u003cbr\u003e\u003cbr\u003e• Sizes are listed as general popular sizes most commonly ordered for tees.\u003cbr\u003e• All transfers are non-refundable.\u003cbr\u003e• No returns are accepted.\u003cbr\u003e• When you purchase this Ready to Press Transfer, you are agreeing that you are responsible of any outcome of your end product, and that you will be using the correct equipment needed. You are also agreeing that you have fully read the instructions, and you understand the application errors are the responsibility of the buyer (you).\u003cbr\u003e\u003cbr\u003e**** CCMbyCrystal is NOT responsible for lost or stolen mail.***\u003c\/p\u003e\n\u003c\/div\u003e","brand":"CCMbyCrystal","offers":[{"title":"22 X 120","offer_id":44847107866807,"sku":null,"price":60.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0266\/7043\/2439\/files\/drip_09aac1f6-8058-4fb6-bdd7-845a3bccdf5c.jpg?v=1744296621"},{"product_id":"pre-made-orange-badgers-mascot-gang-sheet-60-dtf-gang-sheet","title":"Pre-Made Orange Badgers Mascot GANG Sheet 60\" DTF Gang Sheet","description":"\u003cdiv style=\"text-align: center;\"\u003e\n\u003cp\u003ePre- Made Gang Sheet - All Designs are 11\" Longest side.\u003cbr\u003eThis is a physical print out that will be mailed to you.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDTF Transfers can go on any T-shirt. It has a thinner feel than vinyl.\u003cbr\u003e\u003cbr\u003e**Must use a Heat Press****\u003cbr\u003ePressing Instructions\u003cbr\u003eDTF - Heat press temperature should be set to Polyester and Polyester Blends 285-Cotton 300 F.\u003cbr\u003ePrior to heat pressing, hover the heat press over the transfer INK SIDE UP as close as you can without touching the transfer and allow the transfer to warm up for 30-60 seconds and this process will remove moisture from the transfer. This moisture in the ink builds up during the mailing process. \u003cbr\u003eAfter the transfer is warmed up, it is ready for step 2.\u003cbr\u003eUse Medium to heavy Pressure to press the moisture out of your shirt and then press the transfer on the shirt for 15 seconds, let cool completely and peel. \u003cbr\u003eIf there are small elements in the design, let it cool completely before removing the transfer film.\u003cbr\u003eUse a cover sheet (Teflon or white butcher paper\/copier paper) after you’ve peeled the transfer, press again for 5-10 seconds.\u003cbr\u003e-If printing small print or small text, press for 20 seconds using heavy pressure and let the transfer cool before peeling. If for any reason that the print begins to lift off the shirt, usually due to an inexpensive heat press Don’t freak out, STOP PEELING AND PRESS IT AGAIN. Most likely your heat press has uneven pressure and heat.\u003cbr\u003eMachine wash cold\u003cbr\u003eTumble dry low\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSublimation Transfers\u003cbr\u003eThis transfer is to be used with your heat press for applying designs to your shirts, can coolers, or any sublimation blanks.\u003cbr\u003eA HEAT PRESS is a MUST to applying any Ready to Press Designs. (An iron will NOT work)\u003cbr\u003e• High Poly Tee (at least 65% Poly. 100% is best) or any Sublimation Blank to press the design on.\u003cbr\u003e• Your Heat Press should be set to 385 - 400 Degrees F\u003cbr\u003e• Medium Pressure\u003cbr\u003e• For 60 Seconds.\u003cbr\u003e• Pre-press your garment for 3-5 seconds to remove any moisture\u003cbr\u003e• Place a sheet of paper inside the garment, (copy paper is fine). Directly under where you are putting the design.\u003cbr\u003e• Place your sublimation print face down on the garment\u003cbr\u003e• Cover with white butcher paper.\u003cbr\u003e• Press\u003cbr\u003e• Remove Butcher paper and Transfer Print immediately after pressing\u003cbr\u003e**** Times, temperature, and pressure may vary slightly with different heat presses ****\u003cbr\u003e\u003cbr\u003e• Sizes are listed as general popular sizes most commonly ordered for tees.\u003cbr\u003e• All transfers are non-refundable.\u003cbr\u003e• No returns are accepted.\u003cbr\u003e• When you purchase this Ready to Press Transfer, you are agreeing that you are responsible of any outcome of your end product, and that you will be using the correct equipment needed. You are also agreeing that you have fully read the instructions, and you understand the application errors are the responsibility of the buyer (you).\u003cbr\u003e\u003cbr\u003e**** CCMbyCrystal is NOT responsible for lost or stolen mail.***\u003c\/p\u003e\n\u003c\/div\u003e","brand":"CCMbyCrystal","offers":[{"title":"22 X 60","offer_id":45091230941367,"sku":null,"price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0266\/7043\/2439\/files\/badgersorange.jpg?v=1752591422"},{"product_id":"pre-made-orange-bobcats-mascot-gang-sheet-60-dtf-gang-sheet","title":"Pre-Made Orange Bobcats Mascot GANG Sheet 60\" DTF Gang Sheet","description":"\u003cdiv style=\"text-align: center;\"\u003e\n\u003cp\u003ePre- Made Gang Sheet - All Designs are 11\" Longest side.\u003cbr\u003eThis is a physical print out that will be mailed to you.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDTF Transfers can go on any T-shirt. It has a thinner feel than vinyl.\u003cbr\u003e\u003cbr\u003e**Must use a Heat Press****\u003cbr\u003ePressing Instructions\u003cbr\u003eDTF - Heat press temperature should be set to Polyester and Polyester Blends 285-Cotton 300 F.\u003cbr\u003ePrior to heat pressing, hover the heat press over the transfer INK SIDE UP as close as you can without touching the transfer and allow the transfer to warm up for 30-60 seconds and this process will remove moisture from the transfer. This moisture in the ink builds up during the mailing process. \u003cbr\u003eAfter the transfer is warmed up, it is ready for step 2.\u003cbr\u003eUse Medium to heavy Pressure to press the moisture out of your shirt and then press the transfer on the shirt for 15 seconds, let cool completely and peel. \u003cbr\u003eIf there are small elements in the design, let it cool completely before removing the transfer film.\u003cbr\u003eUse a cover sheet (Teflon or white butcher paper\/copier paper) after you’ve peeled the transfer, press again for 5-10 seconds.\u003cbr\u003e-If printing small print or small text, press for 20 seconds using heavy pressure and let the transfer cool before peeling. If for any reason that the print begins to lift off the shirt, usually due to an inexpensive heat press Don’t freak out, STOP PEELING AND PRESS IT AGAIN. Most likely your heat press has uneven pressure and heat.\u003cbr\u003eMachine wash cold\u003cbr\u003eTumble dry low\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSublimation Transfers\u003cbr\u003eThis transfer is to be used with your heat press for applying designs to your shirts, can coolers, or any sublimation blanks.\u003cbr\u003eA HEAT PRESS is a MUST to applying any Ready to Press Designs. (An iron will NOT work)\u003cbr\u003e• High Poly Tee (at least 65% Poly. 100% is best) or any Sublimation Blank to press the design on.\u003cbr\u003e• Your Heat Press should be set to 385 - 400 Degrees F\u003cbr\u003e• Medium Pressure\u003cbr\u003e• For 60 Seconds.\u003cbr\u003e• Pre-press your garment for 3-5 seconds to remove any moisture\u003cbr\u003e• Place a sheet of paper inside the garment, (copy paper is fine). Directly under where you are putting the design.\u003cbr\u003e• Place your sublimation print face down on the garment\u003cbr\u003e• Cover with white butcher paper.\u003cbr\u003e• Press\u003cbr\u003e• Remove Butcher paper and Transfer Print immediately after pressing\u003cbr\u003e**** Times, temperature, and pressure may vary slightly with different heat presses ****\u003cbr\u003e\u003cbr\u003e• Sizes are listed as general popular sizes most commonly ordered for tees.\u003cbr\u003e• All transfers are non-refundable.\u003cbr\u003e• No returns are accepted.\u003cbr\u003e• When you purchase this Ready to Press Transfer, you are agreeing that you are responsible of any outcome of your end product, and that you will be using the correct equipment needed. You are also agreeing that you have fully read the instructions, and you understand the application errors are the responsibility of the buyer (you).\u003cbr\u003e\u003cbr\u003e**** CCMbyCrystal is NOT responsible for lost or stolen mail.***\u003c\/p\u003e\n\u003c\/div\u003e","brand":"CCMbyCrystal","offers":[{"title":"22 X 60","offer_id":45091235135671,"sku":null,"price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0266\/7043\/2439\/files\/bobcatsorange.jpg?v=1752591484"},{"product_id":"pre-made-red-bulldogs-mascot-gang-sheet-60-dtf-gang-sheet","title":"Pre-Made Red Bulldogs Mascot GANG Sheet 60\" DTF Gang Sheet","description":"\u003cdiv style=\"text-align: center;\"\u003e\n\u003cp\u003ePre- Made Gang Sheet - All Designs are 11\" Longest side.\u003cbr\u003eThis is a physical print out that will be mailed to you.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDTF Transfers can go on any T-shirt. It has a thinner feel than vinyl.\u003cbr\u003e\u003cbr\u003e**Must use a Heat Press****\u003cbr\u003ePressing Instructions\u003cbr\u003eDTF - Heat press temperature should be set to Polyester and Polyester Blends 285-Cotton 300 F.\u003cbr\u003ePrior to heat pressing, hover the heat press over the transfer INK SIDE UP as close as you can without touching the transfer and allow the transfer to warm up for 30-60 seconds and this process will remove moisture from the transfer. This moisture in the ink builds up during the mailing process. \u003cbr\u003eAfter the transfer is warmed up, it is ready for step 2.\u003cbr\u003eUse Medium to heavy Pressure to press the moisture out of your shirt and then press the transfer on the shirt for 15 seconds, let cool completely and peel. \u003cbr\u003eIf there are small elements in the design, let it cool completely before removing the transfer film.\u003cbr\u003eUse a cover sheet (Teflon or white butcher paper\/copier paper) after you’ve peeled the transfer, press again for 5-10 seconds.\u003cbr\u003e-If printing small print or small text, press for 20 seconds using heavy pressure and let the transfer cool before peeling. If for any reason that the print begins to lift off the shirt, usually due to an inexpensive heat press Don’t freak out, STOP PEELING AND PRESS IT AGAIN. Most likely your heat press has uneven pressure and heat.\u003cbr\u003eMachine wash cold\u003cbr\u003eTumble dry low\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSublimation Transfers\u003cbr\u003eThis transfer is to be used with your heat press for applying designs to your shirts, can coolers, or any sublimation blanks.\u003cbr\u003eA HEAT PRESS is a MUST to applying any Ready to Press Designs. (An iron will NOT work)\u003cbr\u003e• High Poly Tee (at least 65% Poly. 100% is best) or any Sublimation Blank to press the design on.\u003cbr\u003e• Your Heat Press should be set to 385 - 400 Degrees F\u003cbr\u003e• Medium Pressure\u003cbr\u003e• For 60 Seconds.\u003cbr\u003e• Pre-press your garment for 3-5 seconds to remove any moisture\u003cbr\u003e• Place a sheet of paper inside the garment, (copy paper is fine). Directly under where you are putting the design.\u003cbr\u003e• Place your sublimation print face down on the garment\u003cbr\u003e• Cover with white butcher paper.\u003cbr\u003e• Press\u003cbr\u003e• Remove Butcher paper and Transfer Print immediately after pressing\u003cbr\u003e**** Times, temperature, and pressure may vary slightly with different heat presses ****\u003cbr\u003e\u003cbr\u003e• Sizes are listed as general popular sizes most commonly ordered for tees.\u003cbr\u003e• All transfers are non-refundable.\u003cbr\u003e• No returns are accepted.\u003cbr\u003e• When you purchase this Ready to Press Transfer, you are agreeing that you are responsible of any outcome of your end product, and that you will be using the correct equipment needed. You are also agreeing that you have fully read the instructions, and you understand the application errors are the responsibility of the buyer (you).\u003cbr\u003e\u003cbr\u003e**** CCMbyCrystal is NOT responsible for lost or stolen mail.***\u003c\/p\u003e\n\u003c\/div\u003e","brand":"CCMbyCrystal","offers":[{"title":"22 X 60","offer_id":45091237527735,"sku":null,"price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0266\/7043\/2439\/files\/bulldogsred_e4b2c8c0-0cb0-4ff3-8461-cfbe726ae6d0.jpg?v=1752591532"},{"product_id":"pre-made-green-eagles-mascot-gang-sheet-60-dtf-gang-sheet","title":"Pre-Made Green Eagles Mascot GANG Sheet 60\" DTF Gang Sheet","description":"\u003cdiv style=\"text-align: center;\"\u003e\n\u003cp\u003ePre- Made Gang Sheet - All Designs are 11\" Longest side.\u003cbr\u003eThis is a physical print out that will be mailed to you.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDTF Transfers can go on any T-shirt. It has a thinner feel than vinyl.\u003cbr\u003e\u003cbr\u003e**Must use a Heat Press****\u003cbr\u003ePressing Instructions\u003cbr\u003eDTF - Heat press temperature should be set to Polyester and Polyester Blends 285-Cotton 300 F.\u003cbr\u003ePrior to heat pressing, hover the heat press over the transfer INK SIDE UP as close as you can without touching the transfer and allow the transfer to warm up for 30-60 seconds and this process will remove moisture from the transfer. This moisture in the ink builds up during the mailing process. \u003cbr\u003eAfter the transfer is warmed up, it is ready for step 2.\u003cbr\u003eUse Medium to heavy Pressure to press the moisture out of your shirt and then press the transfer on the shirt for 15 seconds, let cool completely and peel. \u003cbr\u003eIf there are small elements in the design, let it cool completely before removing the transfer film.\u003cbr\u003eUse a cover sheet (Teflon or white butcher paper\/copier paper) after you’ve peeled the transfer, press again for 5-10 seconds.\u003cbr\u003e-If printing small print or small text, press for 20 seconds using heavy pressure and let the transfer cool before peeling. If for any reason that the print begins to lift off the shirt, usually due to an inexpensive heat press Don’t freak out, STOP PEELING AND PRESS IT AGAIN. Most likely your heat press has uneven pressure and heat.\u003cbr\u003eMachine wash cold\u003cbr\u003eTumble dry low\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSublimation Transfers\u003cbr\u003eThis transfer is to be used with your heat press for applying designs to your shirts, can coolers, or any sublimation blanks.\u003cbr\u003eA HEAT PRESS is a MUST to applying any Ready to Press Designs. (An iron will NOT work)\u003cbr\u003e• High Poly Tee (at least 65% Poly. 100% is best) or any Sublimation Blank to press the design on.\u003cbr\u003e• Your Heat Press should be set to 385 - 400 Degrees F\u003cbr\u003e• Medium Pressure\u003cbr\u003e• For 60 Seconds.\u003cbr\u003e• Pre-press your garment for 3-5 seconds to remove any moisture\u003cbr\u003e• Place a sheet of paper inside the garment, (copy paper is fine). Directly under where you are putting the design.\u003cbr\u003e• Place your sublimation print face down on the garment\u003cbr\u003e• Cover with white butcher paper.\u003cbr\u003e• Press\u003cbr\u003e• Remove Butcher paper and Transfer Print immediately after pressing\u003cbr\u003e**** Times, temperature, and pressure may vary slightly with different heat presses ****\u003cbr\u003e\u003cbr\u003e• Sizes are listed as general popular sizes most commonly ordered for tees.\u003cbr\u003e• All transfers are non-refundable.\u003cbr\u003e• No returns are accepted.\u003cbr\u003e• When you purchase this Ready to Press Transfer, you are agreeing that you are responsible of any outcome of your end product, and that you will be using the correct equipment needed. You are also agreeing that you have fully read the instructions, and you understand the application errors are the responsibility of the buyer (you).\u003cbr\u003e\u003cbr\u003e**** CCMbyCrystal is NOT responsible for lost or stolen mail.***\u003c\/p\u003e\n\u003c\/div\u003e","brand":"CCMbyCrystal","offers":[{"title":"22 X 60","offer_id":45091240837303,"sku":null,"price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0266\/7043\/2439\/files\/eaglesgreen.jpg?v=1752591595"},{"product_id":"pre-made-navy-tigers-mascot-gang-sheet-60-dtf-gang-sheet","title":"Pre-Made Navy Tigers Mascot GANG Sheet 60\" DTF Gang Sheet","description":"\u003cdiv style=\"text-align: center;\"\u003e\n\u003cp\u003ePre- Made Gang Sheet - All Designs are 11\" Longest side.\u003cbr\u003eThis is a physical print out that will be mailed to you.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDTF Transfers can go on any T-shirt. It has a thinner feel than vinyl.\u003cbr\u003e\u003cbr\u003e**Must use a Heat Press****\u003cbr\u003ePressing Instructions\u003cbr\u003eDTF - Heat press temperature should be set to Polyester and Polyester Blends 285-Cotton 300 F.\u003cbr\u003ePrior to heat pressing, hover the heat press over the transfer INK SIDE UP as close as you can without touching the transfer and allow the transfer to warm up for 30-60 seconds and this process will remove moisture from the transfer. This moisture in the ink builds up during the mailing process. \u003cbr\u003eAfter the transfer is warmed up, it is ready for step 2.\u003cbr\u003eUse Medium to heavy Pressure to press the moisture out of your shirt and then press the transfer on the shirt for 15 seconds, let cool completely and peel. \u003cbr\u003eIf there are small elements in the design, let it cool completely before removing the transfer film.\u003cbr\u003eUse a cover sheet (Teflon or white butcher paper\/copier paper) after you’ve peeled the transfer, press again for 5-10 seconds.\u003cbr\u003e-If printing small print or small text, press for 20 seconds using heavy pressure and let the transfer cool before peeling. If for any reason that the print begins to lift off the shirt, usually due to an inexpensive heat press Don’t freak out, STOP PEELING AND PRESS IT AGAIN. Most likely your heat press has uneven pressure and heat.\u003cbr\u003eMachine wash cold\u003cbr\u003eTumble dry low\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSublimation Transfers\u003cbr\u003eThis transfer is to be used with your heat press for applying designs to your shirts, can coolers, or any sublimation blanks.\u003cbr\u003eA HEAT PRESS is a MUST to applying any Ready to Press Designs. (An iron will NOT work)\u003cbr\u003e• High Poly Tee (at least 65% Poly. 100% is best) or any Sublimation Blank to press the design on.\u003cbr\u003e• Your Heat Press should be set to 385 - 400 Degrees F\u003cbr\u003e• Medium Pressure\u003cbr\u003e• For 60 Seconds.\u003cbr\u003e• Pre-press your garment for 3-5 seconds to remove any moisture\u003cbr\u003e• Place a sheet of paper inside the garment, (copy paper is fine). Directly under where you are putting the design.\u003cbr\u003e• Place your sublimation print face down on the garment\u003cbr\u003e• Cover with white butcher paper.\u003cbr\u003e• Press\u003cbr\u003e• Remove Butcher paper and Transfer Print immediately after pressing\u003cbr\u003e**** Times, temperature, and pressure may vary slightly with different heat presses ****\u003cbr\u003e\u003cbr\u003e• Sizes are listed as general popular sizes most commonly ordered for tees.\u003cbr\u003e• All transfers are non-refundable.\u003cbr\u003e• No returns are accepted.\u003cbr\u003e• When you purchase this Ready to Press Transfer, you are agreeing that you are responsible of any outcome of your end product, and that you will be using the correct equipment needed. You are also agreeing that you have fully read the instructions, and you understand the application errors are the responsibility of the buyer (you).\u003cbr\u003e\u003cbr\u003e**** CCMbyCrystal is NOT responsible for lost or stolen mail.***\u003c\/p\u003e\n\u003c\/div\u003e","brand":"CCMbyCrystal","offers":[{"title":"22 X 60","offer_id":45091244867767,"sku":null,"price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0266\/7043\/2439\/files\/tigersnavy_1eb80091-76ad-423c-b895-059446f50ca9.jpg?v=1752591690"},{"product_id":"pre-made-red-tigers-mascot-gang-sheet-60-dtf-gang-sheet","title":"Pre-Made Red Tigers Mascot GANG Sheet 60\" DTF Gang Sheet","description":"\u003cdiv style=\"text-align: center;\"\u003e\n\u003cp\u003ePre- Made Gang Sheet - All Designs are 11\" Longest side.\u003cbr\u003eThis is a physical print out that will be mailed to you.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDTF Transfers can go on any T-shirt. It has a thinner feel than vinyl.\u003cbr\u003e\u003cbr\u003e**Must use a Heat Press****\u003cbr\u003ePressing Instructions\u003cbr\u003eDTF - Heat press temperature should be set to Polyester and Polyester Blends 285-Cotton 300 F.\u003cbr\u003ePrior to heat pressing, hover the heat press over the transfer INK SIDE UP as close as you can without touching the transfer and allow the transfer to warm up for 30-60 seconds and this process will remove moisture from the transfer. This moisture in the ink builds up during the mailing process. \u003cbr\u003eAfter the transfer is warmed up, it is ready for step 2.\u003cbr\u003eUse Medium to heavy Pressure to press the moisture out of your shirt and then press the transfer on the shirt for 15 seconds, let cool completely and peel. \u003cbr\u003eIf there are small elements in the design, let it cool completely before removing the transfer film.\u003cbr\u003eUse a cover sheet (Teflon or white butcher paper\/copier paper) after you’ve peeled the transfer, press again for 5-10 seconds.\u003cbr\u003e-If printing small print or small text, press for 20 seconds using heavy pressure and let the transfer cool before peeling. If for any reason that the print begins to lift off the shirt, usually due to an inexpensive heat press Don’t freak out, STOP PEELING AND PRESS IT AGAIN. Most likely your heat press has uneven pressure and heat.\u003cbr\u003eMachine wash cold\u003cbr\u003eTumble dry low\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSublimation Transfers\u003cbr\u003eThis transfer is to be used with your heat press for applying designs to your shirts, can coolers, or any sublimation blanks.\u003cbr\u003eA HEAT PRESS is a MUST to applying any Ready to Press Designs. (An iron will NOT work)\u003cbr\u003e• High Poly Tee (at least 65% Poly. 100% is best) or any Sublimation Blank to press the design on.\u003cbr\u003e• Your Heat Press should be set to 385 - 400 Degrees F\u003cbr\u003e• Medium Pressure\u003cbr\u003e• For 60 Seconds.\u003cbr\u003e• Pre-press your garment for 3-5 seconds to remove any moisture\u003cbr\u003e• Place a sheet of paper inside the garment, (copy paper is fine). Directly under where you are putting the design.\u003cbr\u003e• Place your sublimation print face down on the garment\u003cbr\u003e• Cover with white butcher paper.\u003cbr\u003e• Press\u003cbr\u003e• Remove Butcher paper and Transfer Print immediately after pressing\u003cbr\u003e**** Times, temperature, and pressure may vary slightly with different heat presses ****\u003cbr\u003e\u003cbr\u003e• Sizes are listed as general popular sizes most commonly ordered for tees.\u003cbr\u003e• All transfers are non-refundable.\u003cbr\u003e• No returns are accepted.\u003cbr\u003e• When you purchase this Ready to Press Transfer, you are agreeing that you are responsible of any outcome of your end product, and that you will be using the correct equipment needed. You are also agreeing that you have fully read the instructions, and you understand the application errors are the responsibility of the buyer (you).\u003cbr\u003e\u003cbr\u003e**** CCMbyCrystal is NOT responsible for lost or stolen mail.***\u003c\/p\u003e\n\u003c\/div\u003e","brand":"CCMbyCrystal","offers":[{"title":"22 X 60","offer_id":45091247685815,"sku":null,"price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0266\/7043\/2439\/files\/tigersred.jpg?v=1752591719"},{"product_id":"120-pre-made-teacher-gang-sheet-all-designs-11-longest-gang-sheets-dtf-transfers-ready-to-press-copy","title":"120\" Pre-Made Teacher Gang Sheet All Designs 11\" Longest Gang Sheets DTF Transfers Ready to Press (Copy)","description":"\u003cdiv style=\"text-align: center;\"\u003e\n\u003cp\u003eDesigns are 11\" Longest side. \u003cbr\u003e22X120\"\u003cbr\u003eThis is a physical print out that will be mailed to you.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDTF Transfers can go on any T-shirt. It has a thinner feel than vinyl.\u003cbr\u003e\u003cbr\u003e**Must use a Heat Press****\u003cbr\u003ePressing Instructions\u003cbr\u003eDTF - Heat press temperature should be set to Polyester and Polyester Blends 285-Cotton 300 F.\u003cbr\u003ePrior to heat pressing, hover the heat press over the transfer INK SIDE UP as close as you can without touching the transfer and allow the transfer to warm up for 30-60 seconds and this process will remove moisture from the transfer. This moisture in the ink builds up during the mailing process. \u003cbr\u003eAfter the transfer is warmed up, it is ready for step 2.\u003cbr\u003eUse Medium to heavy Pressure to press the moisture out of your shirt and then press the transfer on the shirt for 15 seconds, let cool completely and peel. \u003cbr\u003eIf there are small elements in the design, let it cool completely before removing the transfer film.\u003cbr\u003eUse a cover sheet (Teflon or white butcher paper\/copier paper) after you’ve peeled the transfer, press again for 5-10 seconds.\u003cbr\u003e-If printing small print or small text, press for 20 seconds using heavy pressure and let the transfer cool before peeling. If for any reason that the print begins to lift off the shirt, usually due to an inexpensive heat press Don’t freak out, STOP PEELING AND PRESS IT AGAIN. Most likely your heat press has uneven pressure and heat.\u003cbr\u003eMachine wash cold\u003cbr\u003eTumble dry low\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSublimation Transfers\u003cbr\u003eThis transfer is to be used with your heat press for applying designs to your shirts, can coolers, or any sublimation blanks.\u003cbr\u003eA HEAT PRESS is a MUST to applying any Ready to Press Designs. (An iron will NOT work)\u003cbr\u003e• High Poly Tee (at least 65% Poly. 100% is best) or any Sublimation Blank to press the design on.\u003cbr\u003e• Your Heat Press should be set to 385 - 400 Degrees F\u003cbr\u003e• Medium Pressure\u003cbr\u003e• For 60 Seconds.\u003cbr\u003e• Pre-press your garment for 3-5 seconds to remove any moisture\u003cbr\u003e• Place a sheet of paper inside the garment, (copy paper is fine). Directly under where you are putting the design.\u003cbr\u003e• Place your sublimation print face down on the garment\u003cbr\u003e• Cover with white butcher paper.\u003cbr\u003e• Press\u003cbr\u003e• Remove Butcher paper and Transfer Print immediately after pressing\u003cbr\u003e**** Times, temperature, and pressure may vary slightly with different heat presses ****\u003cbr\u003e\u003cbr\u003e• Sizes are listed as general popular sizes most commonly ordered for tees.\u003cbr\u003e• All transfers are non-refundable.\u003cbr\u003e• No returns are accepted.\u003cbr\u003e• When you purchase this Ready to Press Transfer, you are agreeing that you are responsible of any outcome of your end product, and that you will be using the correct equipment needed. You are also agreeing that you have fully read the instructions, and you understand the application errors are the responsibility of the buyer (you).\u003cbr\u003e\u003cbr\u003e**** CCMbyCrystal is NOT responsible for lost or stolen mail.***\u003c\/p\u003e\n\u003c\/div\u003e","brand":"CCMbyCrystal","offers":[{"title":"22 X 120","offer_id":45107646234807,"sku":null,"price":60.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0266\/7043\/2439\/files\/teacher_fbcda09a-1240-47aa-854c-67e59d87d15a.jpg?v=1753214679"},{"product_id":"pre-made-red-bulldogs-mascot-gang-sheet-60-dtf-gang-sheet-1","title":"Pre-Made Yellow Eagles Mascot GANG Sheet 60\" DTF Gang Sheet","description":"\u003cdiv style=\"text-align: center;\"\u003e\n\u003cp\u003ePre- Made Gang Sheet - All Designs are 11\" Longest side.\u003cbr\u003eThis is a physical print out that will be mailed to you.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDTF Transfers can go on any T-shirt. It has a thinner feel than vinyl.\u003cbr\u003e\u003cbr\u003e**Must use a Heat Press****\u003cbr\u003ePressing Instructions\u003cbr\u003eDTF - Heat press temperature should be set to Polyester and Polyester Blends 285-Cotton 300 F.\u003cbr\u003ePrior to heat pressing, hover the heat press over the transfer INK SIDE UP as close as you can without touching the transfer and allow the transfer to warm up for 30-60 seconds and this process will remove moisture from the transfer. This moisture in the ink builds up during the mailing process. \u003cbr\u003eAfter the transfer is warmed up, it is ready for step 2.\u003cbr\u003eUse Medium to heavy Pressure to press the moisture out of your shirt and then press the transfer on the shirt for 15 seconds, let cool completely and peel. \u003cbr\u003eIf there are small elements in the design, let it cool completely before removing the transfer film.\u003cbr\u003eUse a cover sheet (Teflon or white butcher paper\/copier paper) after you’ve peeled the transfer, press again for 5-10 seconds.\u003cbr\u003e-If printing small print or small text, press for 20 seconds using heavy pressure and let the transfer cool before peeling. If for any reason that the print begins to lift off the shirt, usually due to an inexpensive heat press Don’t freak out, STOP PEELING AND PRESS IT AGAIN. Most likely your heat press has uneven pressure and heat.\u003cbr\u003eMachine wash cold\u003cbr\u003eTumble dry low\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSublimation Transfers\u003cbr\u003eThis transfer is to be used with your heat press for applying designs to your shirts, can coolers, or any sublimation blanks.\u003cbr\u003eA HEAT PRESS is a MUST to applying any Ready to Press Designs. (An iron will NOT work)\u003cbr\u003e• High Poly Tee (at least 65% Poly. 100% is best) or any Sublimation Blank to press the design on.\u003cbr\u003e• Your Heat Press should be set to 385 - 400 Degrees F\u003cbr\u003e• Medium Pressure\u003cbr\u003e• For 60 Seconds.\u003cbr\u003e• Pre-press your garment for 3-5 seconds to remove any moisture\u003cbr\u003e• Place a sheet of paper inside the garment, (copy paper is fine). Directly under where you are putting the design.\u003cbr\u003e• Place your sublimation print face down on the garment\u003cbr\u003e• Cover with white butcher paper.\u003cbr\u003e• Press\u003cbr\u003e• Remove Butcher paper and Transfer Print immediately after pressing\u003cbr\u003e**** Times, temperature, and pressure may vary slightly with different heat presses ****\u003cbr\u003e\u003cbr\u003e• Sizes are listed as general popular sizes most commonly ordered for tees.\u003cbr\u003e• All transfers are non-refundable.\u003cbr\u003e• No returns are accepted.\u003cbr\u003e• When you purchase this Ready to Press Transfer, you are agreeing that you are responsible of any outcome of your end product, and that you will be using the correct equipment needed. You are also agreeing that you have fully read the instructions, and you understand the application errors are the responsibility of the buyer (you).\u003cbr\u003e\u003cbr\u003e**** CCMbyCrystal is NOT responsible for lost or stolen mail.***\u003c\/p\u003e\n\u003c\/div\u003e","brand":"CCMbyCrystal","offers":[{"title":"22 X 60","offer_id":45212424339639,"sku":null,"price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0266\/7043\/2439\/files\/eaglesyellow3_66aa7d1a-ecac-49aa-9187-d55497d2d15b.jpg?v=1756315559"},{"product_id":"pre-made-fall-gang-sheet-120-dtf-gang-sheet","title":"Pre Made Fall GANG Sheet 120\" DTF Gang Sheet","description":"\u003cdiv style=\"text-align: center;\"\u003e\n\u003cp\u003eFall  - All Designs are 11\" Longest side.\u003cbr\u003eThis is a physical print out that will be mailed to you.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDTF Transfers can go on any T-shirt. It has a thinner feel than vinyl.\u003cbr\u003e\u003cbr\u003e**Must use a Heat Press****\u003cbr\u003ePressing Instructions\u003cbr\u003eDTF - Heat press temperature should be set to Polyester and Polyester Blends 285-Cotton 300 F.\u003cbr\u003ePrior to heat pressing, hover the heat press over the transfer INK SIDE UP as close as you can without touching the transfer and allow the transfer to warm up for 30-60 seconds and this process will remove moisture from the transfer. This moisture in the ink builds up during the mailing process. \u003cbr\u003eAfter the transfer is warmed up, it is ready for step 2.\u003cbr\u003eUse Medium to heavy Pressure to press the moisture out of your shirt and then press the transfer on the shirt for 15 seconds, let cool completely and peel. \u003cbr\u003eIf there are small elements in the design, let it cool completely before removing the transfer film.\u003cbr\u003eUse a cover sheet (Teflon or white butcher paper\/copier paper) after you’ve peeled the transfer, press again for 5-10 seconds.\u003cbr\u003e-If printing small print or small text, press for 20 seconds using heavy pressure and let the transfer cool before peeling. If for any reason that the print begins to lift off the shirt, usually due to an inexpensive heat press Don’t freak out, STOP PEELING AND PRESS IT AGAIN. Most likely your heat press has uneven pressure and heat.\u003cbr\u003eMachine wash cold\u003cbr\u003eTumble dry low\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSublimation Transfers\u003cbr\u003eThis transfer is to be used with your heat press for applying designs to your shirts, can coolers, or any sublimation blanks.\u003cbr\u003eA HEAT PRESS is a MUST to applying any Ready to Press Designs. (An iron will NOT work)\u003cbr\u003e• High Poly Tee (at least 65% Poly. 100% is best) or any Sublimation Blank to press the design on.\u003cbr\u003e• Your Heat Press should be set to 385 - 400 Degrees F\u003cbr\u003e• Medium Pressure\u003cbr\u003e• For 60 Seconds.\u003cbr\u003e• Pre-press your garment for 3-5 seconds to remove any moisture\u003cbr\u003e• Place a sheet of paper inside the garment, (copy paper is fine). Directly under where you are putting the design.\u003cbr\u003e• Place your sublimation print face down on the garment\u003cbr\u003e• Cover with white butcher paper.\u003cbr\u003e• Press\u003cbr\u003e• Remove Butcher paper and Transfer Print immediately after pressing\u003cbr\u003e**** Times, temperature, and pressure may vary slightly with different heat presses ****\u003cbr\u003e\u003cbr\u003e• Sizes are listed as general popular sizes most commonly ordered for tees.\u003cbr\u003e• All transfers are non-refundable.\u003cbr\u003e• No returns are accepted.\u003cbr\u003e• When you purchase this Ready to Press Transfer, you are agreeing that you are responsible of any outcome of your end product, and that you will be using the correct equipment needed. You are also agreeing that you have fully read the instructions, and you understand the application errors are the responsibility of the buyer (you).\u003cbr\u003e\u003cbr\u003e**** CCMbyCrystal is NOT responsible for lost or stolen mail.***\u003c\/p\u003e\n\u003c\/div\u003e","brand":"CCMbyCrystal","offers":[{"title":"22 x 120","offer_id":45320329363639,"sku":null,"price":60.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0266\/7043\/2439\/files\/FALL_51e125bd-1beb-4c2d-96c7-8151e2abf43f.jpg?v=1759338333"},{"product_id":"pre-made-halloween-gang-sheet-120-dtf-gang-sheet","title":"Pre Made Halloween GANG Sheet 120\" DTF Gang Sheet","description":"\u003cdiv style=\"text-align: center;\"\u003e\n\u003cp\u003eHalloween  - All Designs are 11\" Longest side.\u003cbr\u003eThis is a physical print out that will be mailed to you.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDTF Transfers can go on any T-shirt. It has a thinner feel than vinyl.\u003cbr\u003e\u003cbr\u003e**Must use a Heat Press****\u003cbr\u003ePressing Instructions\u003cbr\u003eDTF - Heat press temperature should be set to Polyester and Polyester Blends 285-Cotton 300 F.\u003cbr\u003ePrior to heat pressing, hover the heat press over the transfer INK SIDE UP as close as you can without touching the transfer and allow the transfer to warm up for 30-60 seconds and this process will remove moisture from the transfer. This moisture in the ink builds up during the mailing process. \u003cbr\u003eAfter the transfer is warmed up, it is ready for step 2.\u003cbr\u003eUse Medium to heavy Pressure to press the moisture out of your shirt and then press the transfer on the shirt for 15 seconds, let cool completely and peel. \u003cbr\u003eIf there are small elements in the design, let it cool completely before removing the transfer film.\u003cbr\u003eUse a cover sheet (Teflon or white butcher paper\/copier paper) after you’ve peeled the transfer, press again for 5-10 seconds.\u003cbr\u003e-If printing small print or small text, press for 20 seconds using heavy pressure and let the transfer cool before peeling. If for any reason that the print begins to lift off the shirt, usually due to an inexpensive heat press Don’t freak out, STOP PEELING AND PRESS IT AGAIN. Most likely your heat press has uneven pressure and heat.\u003cbr\u003eMachine wash cold\u003cbr\u003eTumble dry low\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSublimation Transfers\u003cbr\u003eThis transfer is to be used with your heat press for applying designs to your shirts, can coolers, or any sublimation blanks.\u003cbr\u003eA HEAT PRESS is a MUST to applying any Ready to Press Designs. (An iron will NOT work)\u003cbr\u003e• High Poly Tee (at least 65% Poly. 100% is best) or any Sublimation Blank to press the design on.\u003cbr\u003e• Your Heat Press should be set to 385 - 400 Degrees F\u003cbr\u003e• Medium Pressure\u003cbr\u003e• For 60 Seconds.\u003cbr\u003e• Pre-press your garment for 3-5 seconds to remove any moisture\u003cbr\u003e• Place a sheet of paper inside the garment, (copy paper is fine). Directly under where you are putting the design.\u003cbr\u003e• Place your sublimation print face down on the garment\u003cbr\u003e• Cover with white butcher paper.\u003cbr\u003e• Press\u003cbr\u003e• Remove Butcher paper and Transfer Print immediately after pressing\u003cbr\u003e**** Times, temperature, and pressure may vary slightly with different heat presses ****\u003cbr\u003e\u003cbr\u003e• Sizes are listed as general popular sizes most commonly ordered for tees.\u003cbr\u003e• All transfers are non-refundable.\u003cbr\u003e• No returns are accepted.\u003cbr\u003e• When you purchase this Ready to Press Transfer, you are agreeing that you are responsible of any outcome of your end product, and that you will be using the correct equipment needed. You are also agreeing that you have fully read the instructions, and you understand the application errors are the responsibility of the buyer (you).\u003cbr\u003e\u003cbr\u003e**** CCMbyCrystal is NOT responsible for lost or stolen mail.***\u003c\/p\u003e\n\u003c\/div\u003e","brand":"CCMbyCrystal","offers":[{"title":"22 x 120","offer_id":45320629584055,"sku":null,"price":60.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0266\/7043\/2439\/files\/HALLOWEEN_165f922b-600e-4854-a184-8a766ef4a4ff.jpg?v=1759350916"},{"product_id":"pre-made-christmas-gang-sheet-120-dtf-gang-sheet","title":"Pre Made Christmas GANG Sheet 120\" DTF Gang Sheet","description":"\u003cdiv style=\"text-align: center;\"\u003e\n\u003cp\u003eHalloween  - All Designs are 11\" Longest side.\u003cbr\u003eThis is a physical print out that will be mailed to you.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDTF Transfers can go on any T-shirt. It has a thinner feel than vinyl.\u003cbr\u003e\u003cbr\u003e**Must use a Heat Press****\u003cbr\u003ePressing Instructions\u003cbr\u003eDTF - Heat press temperature should be set to Polyester and Polyester Blends 285-Cotton 300 F.\u003cbr\u003ePrior to heat pressing, hover the heat press over the transfer INK SIDE UP as close as you can without touching the transfer and allow the transfer to warm up for 30-60 seconds and this process will remove moisture from the transfer. This moisture in the ink builds up during the mailing process. \u003cbr\u003eAfter the transfer is warmed up, it is ready for step 2.\u003cbr\u003eUse Medium to heavy Pressure to press the moisture out of your shirt and then press the transfer on the shirt for 15 seconds, let cool completely and peel. \u003cbr\u003eIf there are small elements in the design, let it cool completely before removing the transfer film.\u003cbr\u003eUse a cover sheet (Teflon or white butcher paper\/copier paper) after you’ve peeled the transfer, press again for 5-10 seconds.\u003cbr\u003e-If printing small print or small text, press for 20 seconds using heavy pressure and let the transfer cool before peeling. If for any reason that the print begins to lift off the shirt, usually due to an inexpensive heat press Don’t freak out, STOP PEELING AND PRESS IT AGAIN. Most likely your heat press has uneven pressure and heat.\u003cbr\u003eMachine wash cold\u003cbr\u003eTumble dry low\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSublimation Transfers\u003cbr\u003eThis transfer is to be used with your heat press for applying designs to your shirts, can coolers, or any sublimation blanks.\u003cbr\u003eA HEAT PRESS is a MUST to applying any Ready to Press Designs. (An iron will NOT work)\u003cbr\u003e• High Poly Tee (at least 65% Poly. 100% is best) or any Sublimation Blank to press the design on.\u003cbr\u003e• Your Heat Press should be set to 385 - 400 Degrees F\u003cbr\u003e• Medium Pressure\u003cbr\u003e• For 60 Seconds.\u003cbr\u003e• Pre-press your garment for 3-5 seconds to remove any moisture\u003cbr\u003e• Place a sheet of paper inside the garment, (copy paper is fine). Directly under where you are putting the design.\u003cbr\u003e• Place your sublimation print face down on the garment\u003cbr\u003e• Cover with white butcher paper.\u003cbr\u003e• Press\u003cbr\u003e• Remove Butcher paper and Transfer Print immediately after pressing\u003cbr\u003e**** Times, temperature, and pressure may vary slightly with different heat presses ****\u003cbr\u003e\u003cbr\u003e• Sizes are listed as general popular sizes most commonly ordered for tees.\u003cbr\u003e• All transfers are non-refundable.\u003cbr\u003e• No returns are accepted.\u003cbr\u003e• When you purchase this Ready to Press Transfer, you are agreeing that you are responsible of any outcome of your end product, and that you will be using the correct equipment needed. You are also agreeing that you have fully read the instructions, and you understand the application errors are the responsibility of the buyer (you).\u003cbr\u003e\u003cbr\u003e**** CCMbyCrystal is NOT responsible for lost or stolen mail.***\u003c\/p\u003e\n\u003c\/div\u003e","brand":"CCMbyCrystal","offers":[{"title":"22 x 120","offer_id":45320646000823,"sku":null,"price":60.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0266\/7043\/2439\/files\/christmas_ac4af36d-fb0a-41eb-b4f3-fc386400b8aa.jpg?v=1759352205"},{"product_id":"pre-made-pink-christmas-gang-sheet-120-dtf-gang-sheet","title":"Pre Made Pink Christmas GANG Sheet 120\" DTF Gang Sheet","description":"\u003cdiv style=\"text-align: center;\"\u003e\n\u003cp\u003ePink Christmas  - All Designs are 11\" Longest side.\u003cbr\u003eThis is a physical print out that will be mailed to you.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDTF Transfers can go on any T-shirt. It has a thinner feel than vinyl.\u003cbr\u003e\u003cbr\u003e**Must use a Heat Press****\u003cbr\u003ePressing Instructions\u003cbr\u003eDTF - Heat press temperature should be set to Polyester and Polyester Blends 285-Cotton 300 F.\u003cbr\u003ePrior to heat pressing, hover the heat press over the transfer INK SIDE UP as close as you can without touching the transfer and allow the transfer to warm up for 30-60 seconds and this process will remove moisture from the transfer. This moisture in the ink builds up during the mailing process. \u003cbr\u003eAfter the transfer is warmed up, it is ready for step 2.\u003cbr\u003eUse Medium to heavy Pressure to press the moisture out of your shirt and then press the transfer on the shirt for 15 seconds, let cool completely and peel. \u003cbr\u003eIf there are small elements in the design, let it cool completely before removing the transfer film.\u003cbr\u003eUse a cover sheet (Teflon or white butcher paper\/copier paper) after you’ve peeled the transfer, press again for 5-10 seconds.\u003cbr\u003e-If printing small print or small text, press for 20 seconds using heavy pressure and let the transfer cool before peeling. If for any reason that the print begins to lift off the shirt, usually due to an inexpensive heat press Don’t freak out, STOP PEELING AND PRESS IT AGAIN. Most likely your heat press has uneven pressure and heat.\u003cbr\u003eMachine wash cold\u003cbr\u003eTumble dry low\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSublimation Transfers\u003cbr\u003eThis transfer is to be used with your heat press for applying designs to your shirts, can coolers, or any sublimation blanks.\u003cbr\u003eA HEAT PRESS is a MUST to applying any Ready to Press Designs. (An iron will NOT work)\u003cbr\u003e• High Poly Tee (at least 65% Poly. 100% is best) or any Sublimation Blank to press the design on.\u003cbr\u003e• Your Heat Press should be set to 385 - 400 Degrees F\u003cbr\u003e• Medium Pressure\u003cbr\u003e• For 60 Seconds.\u003cbr\u003e• Pre-press your garment for 3-5 seconds to remove any moisture\u003cbr\u003e• Place a sheet of paper inside the garment, (copy paper is fine). Directly under where you are putting the design.\u003cbr\u003e• Place your sublimation print face down on the garment\u003cbr\u003e• Cover with white butcher paper.\u003cbr\u003e• Press\u003cbr\u003e• Remove Butcher paper and Transfer Print immediately after pressing\u003cbr\u003e**** Times, temperature, and pressure may vary slightly with different heat presses ****\u003cbr\u003e\u003cbr\u003e• Sizes are listed as general popular sizes most commonly ordered for tees.\u003cbr\u003e• All transfers are non-refundable.\u003cbr\u003e• No returns are accepted.\u003cbr\u003e• When you purchase this Ready to Press Transfer, you are agreeing that you are responsible of any outcome of your end product, and that you will be using the correct equipment needed. You are also agreeing that you have fully read the instructions, and you understand the application errors are the responsibility of the buyer (you).\u003cbr\u003e\u003cbr\u003e**** CCMbyCrystal is NOT responsible for lost or stolen mail.***\u003c\/p\u003e\n\u003c\/div\u003e","brand":"CCMbyCrystal","offers":[{"title":"22 x 120","offer_id":45323666849975,"sku":null,"price":60.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0266\/7043\/2439\/files\/pinkchristmas_cda4f197-f79a-4eb1-9b1c-1e5c0929f422.jpg?v=1759414167"},{"product_id":"pre-made-mardi-gras-gang-sheet-60-dtf-gang-sheet","title":"Pre-Made Mardi Gras GANG Sheet 60\" DTF Gang Sheet","description":"\u003cdiv style=\"text-align: center;\"\u003e\n\u003cp\u003eAll Designs are 11\" Longest side.\u003cbr\u003eThis is a physical print out that will be mailed to you.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDTF Transfers can go on any T-shirt. It has a thinner feel than vinyl.\u003cbr\u003e\u003cbr\u003e**Must use a Heat Press****\u003cbr\u003ePressing Instructions\u003cbr\u003eDTF - Heat press temperature should be set to Polyester and Polyester Blends 285-Cotton 300 F.\u003cbr\u003ePrior to heat pressing, hover the heat press over the transfer INK SIDE UP as close as you can without touching the transfer and allow the transfer to warm up for 30-60 seconds and this process will remove moisture from the transfer. This moisture in the ink builds up during the mailing process. \u003cbr\u003eAfter the transfer is warmed up, it is ready for step 2.\u003cbr\u003eUse Medium to heavy Pressure to press the moisture out of your shirt and then press the transfer on the shirt for 15 seconds, let cool completely and peel. \u003cbr\u003eIf there are small elements in the design, let it cool completely before removing the transfer film.\u003cbr\u003eUse a cover sheet (Teflon or white butcher paper\/copier paper) after you’ve peeled the transfer, press again for 5-10 seconds.\u003cbr\u003e-If printing small print or small text, press for 20 seconds using heavy pressure and let the transfer cool before peeling. If for any reason that the print begins to lift off the shirt, usually due to an inexpensive heat press Don’t freak out, STOP PEELING AND PRESS IT AGAIN. Most likely your heat press has uneven pressure and heat.\u003cbr\u003eMachine wash cold\u003cbr\u003eTumble dry low\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSublimation Transfers\u003cbr\u003eThis transfer is to be used with your heat press for applying designs to your shirts, can coolers, or any sublimation blanks.\u003cbr\u003eA HEAT PRESS is a MUST to applying any Ready to Press Designs. (An iron will NOT work)\u003cbr\u003e• High Poly Tee (at least 65% Poly. 100% is best) or any Sublimation Blank to press the design on.\u003cbr\u003e• Your Heat Press should be set to 385 - 400 Degrees F\u003cbr\u003e• Medium Pressure\u003cbr\u003e• For 60 Seconds.\u003cbr\u003e• Pre-press your garment for 3-5 seconds to remove any moisture\u003cbr\u003e• Place a sheet of paper inside the garment, (copy paper is fine). Directly under where you are putting the design.\u003cbr\u003e• Place your sublimation print face down on the garment\u003cbr\u003e• Cover with white butcher paper.\u003cbr\u003e• Press\u003cbr\u003e• Remove Butcher paper and Transfer Print immediately after pressing\u003cbr\u003e**** Times, temperature, and pressure may vary slightly with different heat presses ****\u003cbr\u003e\u003cbr\u003e• Sizes are listed as general popular sizes most commonly ordered for tees.\u003cbr\u003e• All transfers are non-refundable.\u003cbr\u003e• No returns are accepted.\u003cbr\u003e• When you purchase this Ready to Press Transfer, you are agreeing that you are responsible of any outcome of your end product, and that you will be using the correct equipment needed. You are also agreeing that you have fully read the instructions, and you understand the application errors are the responsibility of the buyer (you).\u003cbr\u003e\u003cbr\u003e**** CCMbyCrystal is NOT responsible for lost or stolen mail.***\u003c\/p\u003e\n\u003c\/div\u003e","brand":"CCMbyCrystal","offers":[{"title":"22 X 60","offer_id":45704366457015,"sku":null,"price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0266\/7043\/2439\/files\/mardi_21aea33d-746f-400b-b729-43c18ebf3c8b.jpg?v=1767378964"},{"product_id":"pre-madest-patricks-day-gang-sheet-60-dtf-gang-sheet","title":"Pre-MadeSt. Patrick's Day GANG Sheet 60\" DTF Gang Sheet","description":"\u003cdiv style=\"text-align: center;\"\u003e\n\u003cp\u003eAll Designs are 11\" Longest side.\u003cbr\u003eThis is a physical print out that will be mailed to you.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDTF Transfers can go on any T-shirt. It has a thinner feel than vinyl.\u003cbr\u003e\u003cbr\u003e**Must use a Heat Press****\u003cbr\u003ePressing Instructions\u003cbr\u003eDTF - Heat press temperature should be set to Polyester and Polyester Blends 285-Cotton 300 F.\u003cbr\u003ePrior to heat pressing, hover the heat press over the transfer INK SIDE UP as close as you can without touching the transfer and allow the transfer to warm up for 30-60 seconds and this process will remove moisture from the transfer. This moisture in the ink builds up during the mailing process. \u003cbr\u003eAfter the transfer is warmed up, it is ready for step 2.\u003cbr\u003eUse Medium to heavy Pressure to press the moisture out of your shirt and then press the transfer on the shirt for 15 seconds, let cool completely and peel. \u003cbr\u003eIf there are small elements in the design, let it cool completely before removing the transfer film.\u003cbr\u003eUse a cover sheet (Teflon or white butcher paper\/copier paper) after you’ve peeled the transfer, press again for 5-10 seconds.\u003cbr\u003e-If printing small print or small text, press for 20 seconds using heavy pressure and let the transfer cool before peeling. If for any reason that the print begins to lift off the shirt, usually due to an inexpensive heat press Don’t freak out, STOP PEELING AND PRESS IT AGAIN. Most likely your heat press has uneven pressure and heat.\u003cbr\u003eMachine wash cold\u003cbr\u003eTumble dry low\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSublimation Transfers\u003cbr\u003eThis transfer is to be used with your heat press for applying designs to your shirts, can coolers, or any sublimation blanks.\u003cbr\u003eA HEAT PRESS is a MUST to applying any Ready to Press Designs. (An iron will NOT work)\u003cbr\u003e• High Poly Tee (at least 65% Poly. 100% is best) or any Sublimation Blank to press the design on.\u003cbr\u003e• Your Heat Press should be set to 385 - 400 Degrees F\u003cbr\u003e• Medium Pressure\u003cbr\u003e• For 60 Seconds.\u003cbr\u003e• Pre-press your garment for 3-5 seconds to remove any moisture\u003cbr\u003e• Place a sheet of paper inside the garment, (copy paper is fine). Directly under where you are putting the design.\u003cbr\u003e• Place your sublimation print face down on the garment\u003cbr\u003e• Cover with white butcher paper.\u003cbr\u003e• Press\u003cbr\u003e• Remove Butcher paper and Transfer Print immediately after pressing\u003cbr\u003e**** Times, temperature, and pressure may vary slightly with different heat presses ****\u003cbr\u003e\u003cbr\u003e• Sizes are listed as general popular sizes most commonly ordered for tees.\u003cbr\u003e• All transfers are non-refundable.\u003cbr\u003e• No returns are accepted.\u003cbr\u003e• When you purchase this Ready to Press Transfer, you are agreeing that you are responsible of any outcome of your end product, and that you will be using the correct equipment needed. You are also agreeing that you have fully read the instructions, and you understand the application errors are the responsibility of the buyer (you).\u003cbr\u003e\u003cbr\u003e**** CCMbyCrystal is NOT responsible for lost or stolen mail.***\u003c\/p\u003e\n\u003c\/div\u003e","brand":"CCMbyCrystal","offers":[{"title":"22 X 60","offer_id":45704367243447,"sku":null,"price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0266\/7043\/2439\/files\/st.jpg?v=1767379021"},{"product_id":"pre-made-valentines-day2-gang-sheet-60-dtf-gang-sheet","title":"Pre-Made Valentines Day2 GANG Sheet 60\" DTF Gang Sheet","description":"\u003cdiv style=\"text-align: center;\"\u003e\n\u003cp\u003eAll Designs are 11\" Longest side.\u003cbr\u003eThis is a physical print out that will be mailed to you.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDTF Transfers can go on any T-shirt. It has a thinner feel than vinyl.\u003cbr\u003e\u003cbr\u003e**Must use a Heat Press****\u003cbr\u003ePressing Instructions\u003cbr\u003eDTF - Heat press temperature should be set to Polyester and Polyester Blends 285-Cotton 300 F.\u003cbr\u003ePrior to heat pressing, hover the heat press over the transfer INK SIDE UP as close as you can without touching the transfer and allow the transfer to warm up for 30-60 seconds and this process will remove moisture from the transfer. This moisture in the ink builds up during the mailing process. \u003cbr\u003eAfter the transfer is warmed up, it is ready for step 2.\u003cbr\u003eUse Medium to heavy Pressure to press the moisture out of your shirt and then press the transfer on the shirt for 15 seconds, let cool completely and peel. \u003cbr\u003eIf there are small elements in the design, let it cool completely before removing the transfer film.\u003cbr\u003eUse a cover sheet (Teflon or white butcher paper\/copier paper) after you’ve peeled the transfer, press again for 5-10 seconds.\u003cbr\u003e-If printing small print or small text, press for 20 seconds using heavy pressure and let the transfer cool before peeling. If for any reason that the print begins to lift off the shirt, usually due to an inexpensive heat press Don’t freak out, STOP PEELING AND PRESS IT AGAIN. Most likely your heat press has uneven pressure and heat.\u003cbr\u003eMachine wash cold\u003cbr\u003eTumble dry low\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSublimation Transfers\u003cbr\u003eThis transfer is to be used with your heat press for applying designs to your shirts, can coolers, or any sublimation blanks.\u003cbr\u003eA HEAT PRESS is a MUST to applying any Ready to Press Designs. (An iron will NOT work)\u003cbr\u003e• High Poly Tee (at least 65% Poly. 100% is best) or any Sublimation Blank to press the design on.\u003cbr\u003e• Your Heat Press should be set to 385 - 400 Degrees F\u003cbr\u003e• Medium Pressure\u003cbr\u003e• For 60 Seconds.\u003cbr\u003e• Pre-press your garment for 3-5 seconds to remove any moisture\u003cbr\u003e• Place a sheet of paper inside the garment, (copy paper is fine). Directly under where you are putting the design.\u003cbr\u003e• Place your sublimation print face down on the garment\u003cbr\u003e• Cover with white butcher paper.\u003cbr\u003e• Press\u003cbr\u003e• Remove Butcher paper and Transfer Print immediately after pressing\u003cbr\u003e**** Times, temperature, and pressure may vary slightly with different heat presses ****\u003cbr\u003e\u003cbr\u003e• Sizes are listed as general popular sizes most commonly ordered for tees.\u003cbr\u003e• All transfers are non-refundable.\u003cbr\u003e• No returns are accepted.\u003cbr\u003e• When you purchase this Ready to Press Transfer, you are agreeing that you are responsible of any outcome of your end product, and that you will be using the correct equipment needed. You are also agreeing that you have fully read the instructions, and you understand the application errors are the responsibility of the buyer (you).\u003cbr\u003e\u003cbr\u003e**** CCMbyCrystal is NOT responsible for lost or stolen mail.***\u003c\/p\u003e\n\u003c\/div\u003e","brand":"CCMbyCrystal","offers":[{"title":"22 X 60","offer_id":45704367571127,"sku":null,"price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0266\/7043\/2439\/files\/v1.jpg?v=1767379091"},{"product_id":"pre-made-valentines-day1-gang-sheet-60-dtf-gang-sheet","title":"Pre-Made Valentines Day1 GANG Sheet 60\" DTF Gang Sheet","description":"\u003cdiv style=\"text-align: center;\"\u003e\n\u003cp\u003eAll Designs are 11\" Longest side.\u003cbr\u003eThis is a physical print out that will be mailed to you.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDTF Transfers can go on any T-shirt. It has a thinner feel than vinyl.\u003cbr\u003e\u003cbr\u003e**Must use a Heat Press****\u003cbr\u003ePressing Instructions\u003cbr\u003eDTF - Heat press temperature should be set to Polyester and Polyester Blends 285-Cotton 300 F.\u003cbr\u003ePrior to heat pressing, hover the heat press over the transfer INK SIDE UP as close as you can without touching the transfer and allow the transfer to warm up for 30-60 seconds and this process will remove moisture from the transfer. This moisture in the ink builds up during the mailing process. \u003cbr\u003eAfter the transfer is warmed up, it is ready for step 2.\u003cbr\u003eUse Medium to heavy Pressure to press the moisture out of your shirt and then press the transfer on the shirt for 15 seconds, let cool completely and peel. \u003cbr\u003eIf there are small elements in the design, let it cool completely before removing the transfer film.\u003cbr\u003eUse a cover sheet (Teflon or white butcher paper\/copier paper) after you’ve peeled the transfer, press again for 5-10 seconds.\u003cbr\u003e-If printing small print or small text, press for 20 seconds using heavy pressure and let the transfer cool before peeling. If for any reason that the print begins to lift off the shirt, usually due to an inexpensive heat press Don’t freak out, STOP PEELING AND PRESS IT AGAIN. Most likely your heat press has uneven pressure and heat.\u003cbr\u003eMachine wash cold\u003cbr\u003eTumble dry low\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSublimation Transfers\u003cbr\u003eThis transfer is to be used with your heat press for applying designs to your shirts, can coolers, or any sublimation blanks.\u003cbr\u003eA HEAT PRESS is a MUST to applying any Ready to Press Designs. (An iron will NOT work)\u003cbr\u003e• High Poly Tee (at least 65% Poly. 100% is best) or any Sublimation Blank to press the design on.\u003cbr\u003e• Your Heat Press should be set to 385 - 400 Degrees F\u003cbr\u003e• Medium Pressure\u003cbr\u003e• For 60 Seconds.\u003cbr\u003e• Pre-press your garment for 3-5 seconds to remove any moisture\u003cbr\u003e• Place a sheet of paper inside the garment, (copy paper is fine). Directly under where you are putting the design.\u003cbr\u003e• Place your sublimation print face down on the garment\u003cbr\u003e• Cover with white butcher paper.\u003cbr\u003e• Press\u003cbr\u003e• Remove Butcher paper and Transfer Print immediately after pressing\u003cbr\u003e**** Times, temperature, and pressure may vary slightly with different heat presses ****\u003cbr\u003e\u003cbr\u003e• Sizes are listed as general popular sizes most commonly ordered for tees.\u003cbr\u003e• All transfers are non-refundable.\u003cbr\u003e• No returns are accepted.\u003cbr\u003e• When you purchase this Ready to Press Transfer, you are agreeing that you are responsible of any outcome of your end product, and that you will be using the correct equipment needed. You are also agreeing that you have fully read the instructions, and you understand the application errors are the responsibility of the buyer (you).\u003cbr\u003e\u003cbr\u003e**** CCMbyCrystal is NOT responsible for lost or stolen mail.***\u003c\/p\u003e\n\u003c\/div\u003e","brand":"CCMbyCrystal","offers":[{"title":"22 X 60","offer_id":45704367734967,"sku":null,"price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0266\/7043\/2439\/files\/v2.jpg?v=1767379128"},{"product_id":"pre-made-western-gang-sheet-60-dtf-gang-sheet","title":"Pre-Made Western GANG Sheet 60\" DTF Gang Sheet","description":"\u003cdiv style=\"text-align: center;\"\u003e\n\u003cp\u003eAll Designs are 11\" Longest side.\u003cbr\u003eThis is a physical print out that will be mailed to you.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDTF Transfers can go on any T-shirt. It has a thinner feel than vinyl.\u003cbr\u003e\u003cbr\u003e**Must use a Heat Press****\u003cbr\u003ePressing Instructions\u003cbr\u003eDTF - Heat press temperature should be set to Polyester and Polyester Blends 285-Cotton 300 F.\u003cbr\u003ePrior to heat pressing, hover the heat press over the transfer INK SIDE UP as close as you can without touching the transfer and allow the transfer to warm up for 30-60 seconds and this process will remove moisture from the transfer. This moisture in the ink builds up during the mailing process. \u003cbr\u003eAfter the transfer is warmed up, it is ready for step 2.\u003cbr\u003eUse Medium to heavy Pressure to press the moisture out of your shirt and then press the transfer on the shirt for 15 seconds, let cool completely and peel. \u003cbr\u003eIf there are small elements in the design, let it cool completely before removing the transfer film.\u003cbr\u003eUse a cover sheet (Teflon or white butcher paper\/copier paper) after you’ve peeled the transfer, press again for 5-10 seconds.\u003cbr\u003e-If printing small print or small text, press for 20 seconds using heavy pressure and let the transfer cool before peeling. If for any reason that the print begins to lift off the shirt, usually due to an inexpensive heat press Don’t freak out, STOP PEELING AND PRESS IT AGAIN. Most likely your heat press has uneven pressure and heat.\u003cbr\u003eMachine wash cold\u003cbr\u003eTumble dry low\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSublimation Transfers\u003cbr\u003eThis transfer is to be used with your heat press for applying designs to your shirts, can coolers, or any sublimation blanks.\u003cbr\u003eA HEAT PRESS is a MUST to applying any Ready to Press Designs. (An iron will NOT work)\u003cbr\u003e• High Poly Tee (at least 65% Poly. 100% is best) or any Sublimation Blank to press the design on.\u003cbr\u003e• Your Heat Press should be set to 385 - 400 Degrees F\u003cbr\u003e• Medium Pressure\u003cbr\u003e• For 60 Seconds.\u003cbr\u003e• Pre-press your garment for 3-5 seconds to remove any moisture\u003cbr\u003e• Place a sheet of paper inside the garment, (copy paper is fine). Directly under where you are putting the design.\u003cbr\u003e• Place your sublimation print face down on the garment\u003cbr\u003e• Cover with white butcher paper.\u003cbr\u003e• Press\u003cbr\u003e• Remove Butcher paper and Transfer Print immediately after pressing\u003cbr\u003e**** Times, temperature, and pressure may vary slightly with different heat presses ****\u003cbr\u003e\u003cbr\u003e• Sizes are listed as general popular sizes most commonly ordered for tees.\u003cbr\u003e• All transfers are non-refundable.\u003cbr\u003e• No returns are accepted.\u003cbr\u003e• When you purchase this Ready to Press Transfer, you are agreeing that you are responsible of any outcome of your end product, and that you will be using the correct equipment needed. You are also agreeing that you have fully read the instructions, and you understand the application errors are the responsibility of the buyer (you).\u003cbr\u003e\u003cbr\u003e**** CCMbyCrystal is NOT responsible for lost or stolen mail.***\u003c\/p\u003e\n\u003c\/div\u003e","brand":"CCMbyCrystal","offers":[{"title":"22 X 60","offer_id":45704371273911,"sku":null,"price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0266\/7043\/2439\/files\/western_72731b9c-7adb-4ef6-8648-9a5b848192fb.jpg?v=1767379183"},{"product_id":"pre-made-mama-gang-sheet-60-dtf-gang-sheet","title":"Pre-Made MAMA GANG Sheet 60\" DTF Gang Sheet","description":"\u003cdiv style=\"text-align: center;\"\u003e\n\u003cp\u003eAll Designs are 11\" Longest side.\u003cbr\u003eThis is a physical print out that will be mailed to you.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDTF Transfers can go on any T-shirt. It has a thinner feel than vinyl.\u003cbr\u003e\u003cbr\u003e**Must use a Heat Press****\u003cbr\u003ePressing Instructions\u003cbr\u003eDTF - Heat press temperature should be set to Polyester and Polyester Blends 285-Cotton 300 F.\u003cbr\u003ePrior to heat pressing, hover the heat press over the transfer INK SIDE UP as close as you can without touching the transfer and allow the transfer to warm up for 30-60 seconds and this process will remove moisture from the transfer. This moisture in the ink builds up during the mailing process. \u003cbr\u003eAfter the transfer is warmed up, it is ready for step 2.\u003cbr\u003eUse Medium to heavy Pressure to press the moisture out of your shirt and then press the transfer on the shirt for 15 seconds, let cool completely and peel. \u003cbr\u003eIf there are small elements in the design, let it cool completely before removing the transfer film.\u003cbr\u003eUse a cover sheet (Teflon or white butcher paper\/copier paper) after you’ve peeled the transfer, press again for 5-10 seconds.\u003cbr\u003e-If printing small print or small text, press for 20 seconds using heavy pressure and let the transfer cool before peeling. If for any reason that the print begins to lift off the shirt, usually due to an inexpensive heat press Don’t freak out, STOP PEELING AND PRESS IT AGAIN. Most likely your heat press has uneven pressure and heat.\u003cbr\u003eMachine wash cold\u003cbr\u003eTumble dry low\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSublimation Transfers\u003cbr\u003eThis transfer is to be used with your heat press for applying designs to your shirts, can coolers, or any sublimation blanks.\u003cbr\u003eA HEAT PRESS is a MUST to applying any Ready to Press Designs. (An iron will NOT work)\u003cbr\u003e• High Poly Tee (at least 65% Poly. 100% is best) or any Sublimation Blank to press the design on.\u003cbr\u003e• Your Heat Press should be set to 385 - 400 Degrees F\u003cbr\u003e• Medium Pressure\u003cbr\u003e• For 60 Seconds.\u003cbr\u003e• Pre-press your garment for 3-5 seconds to remove any moisture\u003cbr\u003e• Place a sheet of paper inside the garment, (copy paper is fine). Directly under where you are putting the design.\u003cbr\u003e• Place your sublimation print face down on the garment\u003cbr\u003e• Cover with white butcher paper.\u003cbr\u003e• Press\u003cbr\u003e• Remove Butcher paper and Transfer Print immediately after pressing\u003cbr\u003e**** Times, temperature, and pressure may vary slightly with different heat presses ****\u003cbr\u003e\u003cbr\u003e• Sizes are listed as general popular sizes most commonly ordered for tees.\u003cbr\u003e• All transfers are non-refundable.\u003cbr\u003e• No returns are accepted.\u003cbr\u003e• When you purchase this Ready to Press Transfer, you are agreeing that you are responsible of any outcome of your end product, and that you will be using the correct equipment needed. You are also agreeing that you have fully read the instructions, and you understand the application errors are the responsibility of the buyer (you).\u003cbr\u003e\u003cbr\u003e**** CCMbyCrystal is NOT responsible for lost or stolen mail.***\u003c\/p\u003e\n\u003c\/div\u003e","brand":"CCMbyCrystal","offers":[{"title":"22 X 60","offer_id":45753835585719,"sku":null,"price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0266\/7043\/2439\/files\/mockups_d3b03456-adc8-4793-b023-28d1d5c5b45f.jpg?v=1769190018"},{"product_id":"pre-made-hotshotz-gang-sheets-for-uv-dtf-transfers-read-description","title":"Pre Made Hotshotz Gang Sheets for UV DTF Transfers READ Description","description":"\u003cdiv style=\"text-align: center;\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\n\u003cp\u003eUV DTF GANG SHEET-\u003c\/p\u003e\n\u003cp\u003eThis is a physical print out that will be mailed to you.\u003c\/p\u003e\n\u003cp\u003eUV DTF Instructions\u003cbr\u003ePlease wait a minimum of 24-28 hours before hand washing your glass gently in warm water. Do not use anything abrasive to wash the outside of your glass. Do no soak. Microwave and dishwasher are not recommended.\u003c\/p\u003e\n\u003cp\u003e                 1.  Clean glass.\u003c\/p\u003e\n\u003cp\u003e                 2.  Peel design transfer off paper backing. \u003c\/p\u003e\n\u003cp\u003e                 3.  Align and place the transfer on the cup.\u003c\/p\u003e\n\u003cp\u003e                 4.  Working from the center outwards, press the transfer down.  Use your\u003cbr\u003e                       fingers or a squeegee to push out any bubbles.\u003c\/p\u003e\n\u003cp\u003e                 5.  Peel the clear film off slowly. \u003c\/p\u003e\n\u003cp\u003e***  Once the transfer is on the glass, you cannot reposition it.  ***\u003c\/p\u003e\n\u003cp\u003eYouTube is a great place to start for application tips and tricks.\u003c\/p\u003e\n\u003cp\u003e• All transfers are non-refundable.\u003cbr\u003e• No returns are accepted.\u003c\/p\u003e\n\u003cp\u003e• When you purchase this UV DTF Transfer, you are agreeing that you are responsible of any outcome of your end product, and that you will be using the correct equipment needed. You are also agreeing that you have fully read the instructions, and you understand the application errors are the responsibility of the buyer (you).\u003cbr\u003e**** CCMbyCrystal is NOT responsible for lost or stolen mail.****\u003c\/p\u003e\n\u003c\/div\u003e","brand":"CCMbyCrystal","offers":[{"title":"15.75\"x64\"","offer_id":48618343563447,"sku":null,"price":33.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0266\/7043\/2439\/files\/hotshotz.jpg?v=1781626963"}],"url":"https:\/\/ccmbycrystal.com\/collections\/gang-sheets.oembed","provider":"CCMbyCrystal","version":"1.0","type":"link"}