Aztec Bull Skull UV DTF Transfer 16oz Libby Glass Can Wrap Ready to Apply
Aztec Bull Skull UV DTF Transfer 16oz Libby Glass Can Wrap Ready to Apply
Regular price
$3.95 USD
Regular price
Sale price
$3.95 USD
Unit price
per
Shipping calculated at checkout.
Couldn't load pickup availability
UV DTF Glass Can Wrap
***If you have a specific size for your 16oz Glass Can, add the diameter you need in order notes. The length will be proportionate to the diameter. If there are no order notes, the transfer size will be 9.6”X4.6”. The maximum diameter will be 9.6”.***
9.6 wide X 4.6 length (on most designs)
The width will always be 9.6. Depending on the design the length will be proportionate to the width without going over 4.6.
This is the ready to apply UV DTF transfer.
The Glass Can is not included with this purchase.
This is NOT a digital file.
Please wait a minimum of 24-28 hours before hand washing your glass gently in warm water. Do not use anything abrasive to wash the outside of your glass. Do no soak. Microwave and dishwasher are not recommended.
1. Clean glass.
2. Peel design transfer off paper backing.
3. Align and place the transfer on the cup.
4. Working from the center outwards, press the transfer down. Use your fingers or a squeegee to push out any bubbles.
5. Peel the clear film off.
*** Once the transfer is on the glass, you cannot reposition it. ***
YouTube is a great place to start for application tips and tricks.
• All transfers are non-refundable.
• No returns are accepted.
• When you purchase this UV DTF Transfer, you are agreeing that you are responsible of any outcome of your end product, and that you will be using the correct equipment needed. You are also agreeing that you have fully read the instructions, and you understand the application errors are the responsibility of the buyer (you).
**** CCMbyCrystal is NOT responsible for lost or stolen mail.****
Materials
Materials
Shipping & Returns
Shipping & Returns
Dimensions
Dimensions
Care Instructions
Care Instructions
