Sublimation Gang Sheet

***RESIZING AND COLOR CORRECTIONS ARE NOT AVAILABLE ON GANG SHEET ORDERS.  GANG SHEETS MUST BE PRINT READY***

To Order:

• Please upload your image(s) by clicking the “Create Gang Sheet Button”.  
• Please ensure the sizing and coloring is correct as it will be printed exactly as it is uploaded.
• Once your artwork is formatted, you will be prompted to return to the product page.  Click “Redirect”
• Add the desired quantity and then click “Add to Cart.”

For the best quality prints, we recommend you upload a TRANSPARENT PNG image with a 300 dpi. 

Sublimation Transfers
This transfer is to be used with your heat press for applying designs to your shirts, can coolers, or any sublimation blanks.
A HEAT PRESS is a MUST to applying any Ready to Press Designs. (An iron will NOT work)
• High Poly Tee (at least 65% Poly. 100% is best) or any Sublimation Blank to press the design on.
• Your Heat Press should be set to 385 - 400 Degrees F
• Medium Pressure
• For 60 Seconds.
• Pre-press your garment for 3-5 seconds to remove any moisture
• Place a sheet of paper inside the garment, (copy paper is fine). Directly under where you are putting the design.
• Place your sublimation print face down on the garment
• Cover with white butcher paper.
• Press
• Remove Butcher paper and Transfer Print immediately after pressing
**** Times, temperature, and pressure may vary slightly with different heat presses ****

• Sizes are listed as general popular sizes most commonly ordered for tees.
• All transfers are non-refundable.
• No returns are accepted.
• When you purchase this Ready to Press Transfer, you are agreeing that you are responsible of any outcome of your end product, and that you will be using the correct equipment needed. You are also agreeing that you have fully read the instructions, and you understand the application errors are the responsibility of the buyer (you).

**** CCMbyCrystal is NOT responsible for lost or stolen mail.***